The Dependence of Strength Characteristics of Synthetic Fibers on the Composition of Plasma-Forming Gas and Treatment Time When Exposed to a Low-Pressure Discharge

IF 0.3 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Inorganic Materials: Applied Research Pub Date : 2025-09-24 DOI:10.1134/S2075113325701722

I. Sh. Abdullin, I. K. Nekrasov, F. R. Sagitova

引用次数: 0

Abstract

The physics of modifying the mechanical properties of synthetic fibers during treatment in a capacitive coupling plasma (ССP) discharge at reduced pressure is considered. The dependence of the tensile strength limit of various types of fibers on the composition of the plasma-forming gas, as well as on the duration of the treatment, has been determined. It was found that a mixture of argon and propane-butane allows for the greatest increase in tensile strength for all types of synthetic fibers studied.

Abstract Image

查看原文本刊更多论文

低压放电条件下合成纤维强度特性与等离子体形成气体组成及处理时间的关系

考虑了在电容耦合等离子体（ССP）减压放电处理过程中改变合成纤维机械性能的物理原理。已经确定了各种类型纤维的抗拉强度极限取决于等离子体形成气体的组成以及处理的持续时间。研究发现，氩气和丙烷-丁烷的混合物对所有类型的合成纤维的抗拉强度都有最大的提高。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Inorganic Materials: Applied Research Engineering-Engineering (all)

CiteScore

0.90

自引率

0.00%

发文量

199

期刊介绍： Inorganic Materials: Applied Research contains translations of research articles devoted to applied aspects of inorganic materials. Best articles are selected from four Russian periodicals: Materialovedenie, Perspektivnye Materialy, Fizika i Khimiya Obrabotki Materialov, and Voprosy Materialovedeniya and translated into English. The journal reports recent achievements in materials science: physical and chemical bases of materials science; effects of synergism in composite materials; computer simulations; creation of new materials (including carbon-based materials and ceramics, semiconductors, superconductors, composite materials, polymers, materials for nuclear engineering, materials for aircraft and space engineering, materials for quantum electronics, materials for electronics and optoelectronics, materials for nuclear and thermonuclear power engineering, radiation-hardened materials, materials for use in medicine, etc.); analytical techniques; structure–property relationships; nanostructures and nanotechnologies; advanced technologies; use of hydrogen in structural materials; and economic and environmental issues. The journal also considers engineering issues of materials processing with plasma, high-gradient crystallization, laser technology, and ultrasonic technology. Currently the journal does not accept direct submissions, but submissions to one of the source journals is possible.