Fatigue notch sensitivity of laser direct energy deposited versus wrought Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy

IF 5.7 2区材料科学 Q1 ENGINEERING, MECHANICAL

International Journal of Fatigue Pub Date : 2025-02-08 DOI:10.1016/j.ijfatigue.2025.108869

Jun Cao , Feixiang Weng , Shuquan Zhang , Huaming Wang , Jikui Zhang

{"title":"Fatigue notch sensitivity of laser direct energy deposited versus wrought Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy","authors":"Jun Cao , Feixiang Weng , Shuquan Zhang , Huaming Wang , Jikui Zhang","doi":"10.1016/j.ijfatigue.2025.108869","DOIUrl":null,"url":null,"abstract":"<div><div>The notch, such as hole and chamfer, is unavoidable for aircraft structural components. Stress concentration induced by notch is the leading cause of fatigue failure. It is significant for structural integrity and safety assessment to clarify the intrinsic mechanism causing the difference in fatigue notch sensitivity. The notch fatigue fracture behavior of TC11 samples, fabricated by laser direct energy deposited (LDED) and wrought processes, is studied by high cycle fatigue (HCF) tests, fracture morphology, systematic microstructural characterizations, and theoretical analysis. HCF test results show that the notch fatigue performance of LDED samples reported in this study is superior to that of the wrought ones. The modified critical radius calculated from the equivalent material concept and average strain energy density criterion correlates well with fatigue notch sensitivity <em>q</em> and notch fatigue performance. The thick lamellar <em>α</em> phase produces more crack resistance and higher local plasticity around the notch root, causing lower <em>q</em> of LDED samples. Besides, the difference in <em>q</em> caused by build orientations is attributed to the variations in the angle between the c-axis of the fiber texture and load direction, the dominant slip system, the boundaries between soft and hard grains, and the presence of prior <em>β</em> grain boundaries.</div></div>","PeriodicalId":14112,"journal":{"name":"International Journal of Fatigue","volume":"195 ","pages":"Article 108869"},"PeriodicalIF":5.7000,"publicationDate":"2025-02-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Fatigue","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0142112325000660","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}

引用次数: 0

Abstract

The notch, such as hole and chamfer, is unavoidable for aircraft structural components. Stress concentration induced by notch is the leading cause of fatigue failure. It is significant for structural integrity and safety assessment to clarify the intrinsic mechanism causing the difference in fatigue notch sensitivity. The notch fatigue fracture behavior of TC11 samples, fabricated by laser direct energy deposited (LDED) and wrought processes, is studied by high cycle fatigue (HCF) tests, fracture morphology, systematic microstructural characterizations, and theoretical analysis. HCF test results show that the notch fatigue performance of LDED samples reported in this study is superior to that of the wrought ones. The modified critical radius calculated from the equivalent material concept and average strain energy density criterion correlates well with fatigue notch sensitivity q and notch fatigue performance. The thick lamellar α phase produces more crack resistance and higher local plasticity around the notch root, causing lower q of LDED samples. Besides, the difference in q caused by build orientations is attributed to the variations in the angle between the c-axis of the fiber texture and load direction, the dominant slip system, the boundaries between soft and hard grains, and the presence of prior β grain boundaries.

查看原文本刊更多论文

激光直接能量沉积与锻造 Ti-6.5Al-3.5Mo-1.5Zr-0.3Si 合金的疲劳缺口敏感性比较

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Fatigue 工程技术-材料科学：综合

CiteScore

10.70

自引率

21.70%

发文量

619

审稿时长

58 days

期刊介绍： Typical subjects discussed in International Journal of Fatigue address: Novel fatigue testing and characterization methods (new kinds of fatigue tests, critical evaluation of existing methods, in situ measurement of fatigue degradation, non-contact field measurements) Multiaxial fatigue and complex loading effects of materials and structures, exploring state-of-the-art concepts in degradation under cyclic loading Fatigue in the very high cycle regime, including failure mode transitions from surface to subsurface, effects of surface treatment, processing, and loading conditions Modeling (including degradation processes and related driving forces, multiscale/multi-resolution methods, computational hierarchical and concurrent methods for coupled component and material responses, novel methods for notch root analysis, fracture mechanics, damage mechanics, crack growth kinetics, life prediction and durability, and prediction of stochastic fatigue behavior reflecting microstructure and service conditions) Models for early stages of fatigue crack formation and growth that explicitly consider microstructure and relevant materials science aspects Understanding the influence or manufacturing and processing route on fatigue degradation, and embedding this understanding in more predictive schemes for mitigation and design against fatigue Prognosis and damage state awareness (including sensors, monitoring, methodology, interactive control, accelerated methods, data interpretation) Applications of technologies associated with fatigue and their implications for structural integrity and reliability. This includes issues related to design, operation and maintenance, i.e., life cycle engineering Smart materials and structures that can sense and mitigate fatigue degradation Fatigue of devices and structures at small scales, including effects of process route and surfaces/interfaces.