Infiltration-driven performance enhancement of poly-crystalline cathodes in all-solid-state batteries

Abstract

All-solid-state batteries (ASSBs) with adequately selected cathode materials exhibit a higher energy density and better safety than conventional lithium-ion batteries (LIBs). Ni-rich layered cathodes are benchmark materials for traditional LIBs owing to their high energy density. Recent studies have highlighted the advantages of using crack-free, single-crystalline cathode materials in ASSBs. In this study, a scalable infiltration sheet-type process was used to fabricate composite electrodes with different cathode-material morphologies for ASSBs. Typically, crack-free single-crystalline materials exhibit better retention performance and lower rate capability (i.e., slower kinetics in charge‒discharge processes) than polycrystalline cathode materials. Li6PS5Cl-infiltrated polycrystalline electrodes showed excellent retention performance and rate capability. Galvanostatic intermittent titration technique analysis and transmission electron microscopy of the single-crystalline electrode confirmed severe polarization and the presence of a rock-salt-structure layer in the cathode particles; these results indicated side reactions within the layered structure of the material. In contrast, composite electrodes consisting of polycrystalline cathode materials infiltrated with the solid electrolyte Li6PS5Cl showed excellent electrochemical performance owing to intimate electrode–electrolyte interfacial contact. The result from this study confirmed the critical influence of interface engineering and material morphology on the overall performance and stability of ASSBs and could facilitate the development of high-performance ASSBs in the future. This study introduces a technique for utilizing conventional lithium-ion battery electrodes in all-solid-state batteries. By infiltrating a solid electrolyte solution into the porous electrode, the effects based on the morphology of the active material were investigated. In poly-crystalline materials, high coverage and the formation of a thin side reaction layer were observed. Consequently, the infiltration process also confirmed the superior performance of poly-crystalline materials.