Experimental investigation on the oil occurrence and mobility of lacustrine shales in offshore area of China using 1D/2D nuclear magnetic resonance and centrifugal techniques

Abstract

Shale oil occurrence mechanism and mobility have significant influences on hydrocarbons extraction from shale systems. However, the effects of petrophysical and petroleum geochemical properties on oil mobility are not understood. In this study, shales with different lithofacies were investigated using thin sections, scanning electron microscopy, nuclear magnetic resonance (NMR), and organic geochemical analysis. Shales at original, extracted, oil-saturated, and centrifugal states were systematically scanned using 1D and 2D NMR technologies. The multi-scaled pores were obtained by comparing the T₂ spectra of samples at different states. The 2D NMR identification spectra for hydrocarbon-bearing components were established. The free oil, adsorbed oil, mobile oil contents were quantitatively evaluated and the geological controls on oil mobility were discussed.

Results show that the siliceous shales have the highest total oil and movable oil contents, while the argillaceous shales have the lowest values due to the limited pore space and poor connectivity. Mobile oil mainly stores in interparticle pores, dissolution-related pores and bedding fractures. Its content increases with the increasing felsic minerals. Oil in siliceous shales are rich in low carbon-chain hydrocarbons and has high mobility. Based on oil distribution in multi-scaled pores, a strategy about the mobile oil distribution were proposed: Ultramicropores region is the immobile oil zone; Micropores region is the oil difficult-to-flow zone; Transition pores region is the oil easy-to-flow zone; Macropores region is the completely mobile oil zone. The mobile oil mainly accommodates in transition pores and macropores (pore size >20 nm and mobile oil saturation exceeds 60 %).