Bio-mechanical analysis of porous Ti-6Al-4V scaffold: a comprehensive review on unit cell structures in orthopaedic application.

Abstract

A scaffold is a three-dimensional porous structure that is used as a template to provide structural support for cell adhesion and the formation of new cells. Metallic cellular scaffolds are a good choice as a replacement for human bones in orthopaedic implants, which enhances the quality and longevity of human life. In contrast to conventional methods that produce irregular pore distributions, 3D printing, or additive manufacturing, is characterized by high precision and controlled manufacturing processes. AM processes can precisely control the scaffold's porosity, which makes it possible to produce patient specific implants and achieve regular pore distribution. This review paper explores the potential of Ti-6Al-4V scaffolds produced via the SLM method as a bone substitute. A state-of-the-art review on the effect of design parameters, material, and surface modification on biological and mechanical properties is presented. The desired features of the human tibia and femur bones are compared to bulk and porous Ti6Al4V scaffold. Furthermore, the properties of various porous scaffolds with varying unit cell structures and design parameters are compared to find out the designs that can mimic human bone properties. Porosity up to 65% and pore size of 600 μm was found to give optimum trade-off between mechanical and biological properties. Current manufacturing constraints, biocompatibility of Ti-6Al-4V material, influence of various factors on bio-mechanical properties, and complex interrelation between design parameters are discussed herein. Finally, the most appropriate combination of design parameters that offers a good trade-off between mechanical strength and cell ingrowth are summarized.