The importance of initial extension rate on elasto-capillary thinning of dilute polymer solutions

IF 2.7 2区 工程技术 Q2 MECHANICS
Ann Aisling, Renee Saraka, Nicolas J. Alvarez
{"title":"The importance of initial extension rate on elasto-capillary thinning of dilute polymer solutions","authors":"Ann Aisling,&nbsp;Renee Saraka,&nbsp;Nicolas J. Alvarez","doi":"10.1016/j.jnnfm.2024.105321","DOIUrl":null,"url":null,"abstract":"<div><div>This work focuses on inferring the molecular state of the polymer chain required to induce stress relaxation and the accurate measure of the polymer’s longest relaxation time in uniaxial stretching of dilute polymer solutions. This work is facilitated by the discovery that constant velocity applied at early times leads to initial constant extension rate before reaching the Rayleigh–Plateau instability. Such constant rate experiments are used to correlate initial stretching kinematics with the thinning dynamics in the final thinning regime. We show that there is a minimum initial strain-rate required to induce rate independent elastic effects, and measure the longest relaxation time of the material. Below the minimum extension rate, insufficient stretching of the chain is observed before capillary instability, such that the polymer stress is comparable to the capillary stress at long times and stress relaxation is not achieved. Above the minimum strain-rate, the chain reaches a critical stretch before instability, such that during the unstable filament thinning the polymer stress is significantly larger than the capillary stress and rate-independent stress relaxation is observed. Using a single relaxation mode FENE model, we show that the minimum strain rate leads to a required initial stretch of the chain before reaching the Rayleigh–Plateau limit. These results indicate that the chain conformation before entering the Rayleigh Instability Regime, and the stretching induced during the instability, determines the elastic behavior of the filament. Lastly, this work introduces a characteristic dimensionless group, called the stretchability factor, that can be used to quantitatively compare different materials based on the overall material deformation/kinematic behavior, not just the relaxation time. Overall, these results demonstrate a useful methodology to study the stretching of dilute solutions using a constant velocity stretching scheme.</div></div>","PeriodicalId":54782,"journal":{"name":"Journal of Non-Newtonian Fluid Mechanics","volume":"333 ","pages":"Article 105321"},"PeriodicalIF":2.7000,"publicationDate":"2024-09-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S037702572400137X/pdfft?md5=d1f32f9cee619f02d115117fa2418228&pid=1-s2.0-S037702572400137X-main.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Non-Newtonian Fluid Mechanics","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S037702572400137X","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

Abstract

This work focuses on inferring the molecular state of the polymer chain required to induce stress relaxation and the accurate measure of the polymer’s longest relaxation time in uniaxial stretching of dilute polymer solutions. This work is facilitated by the discovery that constant velocity applied at early times leads to initial constant extension rate before reaching the Rayleigh–Plateau instability. Such constant rate experiments are used to correlate initial stretching kinematics with the thinning dynamics in the final thinning regime. We show that there is a minimum initial strain-rate required to induce rate independent elastic effects, and measure the longest relaxation time of the material. Below the minimum extension rate, insufficient stretching of the chain is observed before capillary instability, such that the polymer stress is comparable to the capillary stress at long times and stress relaxation is not achieved. Above the minimum strain-rate, the chain reaches a critical stretch before instability, such that during the unstable filament thinning the polymer stress is significantly larger than the capillary stress and rate-independent stress relaxation is observed. Using a single relaxation mode FENE model, we show that the minimum strain rate leads to a required initial stretch of the chain before reaching the Rayleigh–Plateau limit. These results indicate that the chain conformation before entering the Rayleigh Instability Regime, and the stretching induced during the instability, determines the elastic behavior of the filament. Lastly, this work introduces a characteristic dimensionless group, called the stretchability factor, that can be used to quantitatively compare different materials based on the overall material deformation/kinematic behavior, not just the relaxation time. Overall, these results demonstrate a useful methodology to study the stretching of dilute solutions using a constant velocity stretching scheme.
初始延伸率对稀释聚合物溶液弹性毛细管稀化的重要性
这项工作的重点是推断引起应力松弛所需的聚合物链分子状态,以及准确测量稀聚合物溶液单轴拉伸过程中聚合物的最长松弛时间。研究发现,在达到瑞利-普法不稳定性之前,早期施加的恒定速度会导致最初的恒定拉伸速率,这为研究工作提供了便利。这种恒定速率实验可用于将初始拉伸运动学与最终稀化机制中的稀化动力学相关联。我们的研究表明,存在一个最小初始应变率,该应变率可诱发与速率无关的弹性效应,并测量材料的最长弛豫时间。低于最小延伸率时,在毛细管不稳定性发生之前会观察到链的拉伸不足,因此聚合物应力在很长一段时间内与毛细管应力相当,无法实现应力松弛。超过最小应变速率后,链在不稳定之前达到临界拉伸,因此在不稳定的细丝变细过程中,聚合物应力明显大于毛细管应力,并观察到与速率无关的应力松弛。通过使用单松弛模式 FENE 模型,我们发现在达到瑞利-平原极限之前,最小应变速率会导致所需的链初始拉伸。这些结果表明,进入瑞利不稳定区之前的链构象和不稳定期间引起的拉伸决定了丝的弹性行为。最后,这项研究引入了一个称为拉伸系数的无量纲特征组,可用于根据材料的整体变形/运动行为(而不仅仅是弛豫时间)对不同材料进行定量比较。总之,这些结果展示了一种使用恒速拉伸方案研究稀溶液拉伸的有用方法。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
5.00
自引率
19.40%
发文量
109
审稿时长
61 days
期刊介绍: The Journal of Non-Newtonian Fluid Mechanics publishes research on flowing soft matter systems. Submissions in all areas of flowing complex fluids are welcomed, including polymer melts and solutions, suspensions, colloids, surfactant solutions, biological fluids, gels, liquid crystals and granular materials. Flow problems relevant to microfluidics, lab-on-a-chip, nanofluidics, biological flows, geophysical flows, industrial processes and other applications are of interest. Subjects considered suitable for the journal include the following (not necessarily in order of importance): Theoretical, computational and experimental studies of naturally or technologically relevant flow problems where the non-Newtonian nature of the fluid is important in determining the character of the flow. We seek in particular studies that lend mechanistic insight into flow behavior in complex fluids or highlight flow phenomena unique to complex fluids. Examples include Instabilities, unsteady and turbulent or chaotic flow characteristics in non-Newtonian fluids, Multiphase flows involving complex fluids, Problems involving transport phenomena such as heat and mass transfer and mixing, to the extent that the non-Newtonian flow behavior is central to the transport phenomena, Novel flow situations that suggest the need for further theoretical study, Practical situations of flow that are in need of systematic theoretical and experimental research. Such issues and developments commonly arise, for example, in the polymer processing, petroleum, pharmaceutical, biomedical and consumer product industries.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信