Influence of the Substrate Thickness in Elastoplastic Deformation of a Microprofile under Orthogonal Constrained Loading

Q3 Engineering

Russian Engineering Research Pub Date : 2024-09-16 DOI:10.3103/s1068798x24701636

N. V. Vulykh

引用次数: 0

Abstract

Local plastic surface deformation of parts after cutting is investigated. It is shown that, with variation in the substrate thickness, the reshaping of the microprojections when the deformation is comparable with the height of the initial profile affects the following parameters: the inclination at the base of the microprojection, the relative length of the smoothed section, and the displacement of the microprofile’s trough during constrained loading.

Abstract Image

查看原文本刊更多论文

基底厚度对正交约束载荷下微轮廓弹塑性变形的影响

摘要研究了零件切割后的局部塑性表面变形。研究表明，随着基体厚度的变化，当变形与初始轮廓高度相当时，微轮廓的重塑会影响以下参数：微轮廓底部的倾斜度、平滑部分的相对长度以及微轮廓槽在约束加载时的位移。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Russian Engineering Research Engineering-Industrial and Manufacturing Engineering

CiteScore

1.20

自引率

0.00%

发文量

226

期刊介绍： Russian Engineering Research is a journal that publishes articles on mechanical and production engineering. The journal covers the development of different branches of mechanical engineering, new technologies, and tools for machine and materials design. Emphasis is on operations research and production-line layout, industrial robots and manipulators, quality control and process engineering, kinematic analysis of machine assemblies, and computerized integrated manufacturing systems.