Investigation of thermally induced surface composition and morphology variation of magnetron sputtered Sb2Se3 absorber layer for thin film solar cells

Abstract

One of the most promising semiconductor materials for the development of sustainable thin-film solar cell technology is antimony selenide (Sb2Se3). Its excellent optical and electrical properties have drawn attention lately for potential application in thin-film solar cells. In this study, Sb2Se3 films deposited using the direct current (DC) magnetron sputtering technique have been subjected to a post-annealing process without an extra selenium supply at temperatures between 150 and 450 °C. Without an extra selenium supply, the impact of post-annealing temperature on the surface composition as well as the physical properties of the fabricated films was investigated. The overall evaluations revealed that the post-annealing temperature is highly efficient in altering the physical properties of the Sb2Se3 absorber thin films. We further observed that the post-annealing process improved the crystallization and the heat treatment temperature quite affected preferential orientation. The surface morphology of films exhibited structural deformation at high post-annealing temperatures (> 350 °C). According to optical and electrical characterizations, respectively, the optical energy gap and the resistivity of Sb2Se3 films reduced with an increment in the post-annealing temperature. Based on the XPS result, the variation in temperature of post-annealing led to a change in the surface composition of the films. The findings on the growth of Sb2Se3 thin films indicate the existence of an intermediate growth temperature that permits the growth of Sb2Se3 films to be optimized. The study’s conclusions can serve as a guide to the growth of Sb2Se3 thin films with the desired crystallinity, surface morphology, and composition for thin film solar cell applications.