The Drawdown of a Reservoir: Its Effect on Seepage Conditions and Stability of Earth Dams

Abstract

This article addresses the reliability and safety of an earth dam in the case of a change in the reservoir water level. The water level must often be reduced to remove water or as a response to an emergency situation in the process of operation of a hydraulic structure. Lower water levels change seepage conditions, such as the surface of depression, values and directions of seepage gradients, seepage rates, and volumetric hydrodynamic loading. Practical hydraulic engineering shows that these changes can have a number of negative consequences. Higher seepage gradients can lead to seepage-triggered deformations in the vicinity of the upstream slope of a structure. Hydrodynamic loads, arising during drawdown, reduce the stability of an upstream slope of a dam and cause its failure. Potential consequences of a drawdown can be evaluated by solving the problem of drawdown seepage for the dam body and base. A numerical solution to this problem is based on the finite element method applied using the PLAXIS 2D software package. Results thus obtained are compared with those obtained using the finite element method in the locally variational formulation. A numerical experiment was conducted to analyze factors affecting the value of the maximum seepage gradient and stability of the earth dam slope. Recommendations were formulated to limit the drawdown parameters and to ensure the safe operation of a structure.