Highly efficient direct air capture using solid–liquid phase separation in aqueous diamine solution as sorbent

Abstract

To reduce climate change, absorbing CO2 directly from the air (DAC) with high-efficient CO2 absorption, low-cost, and environmentally friendly system has been attracted much attention for several decades. In this work, a series of aqueous diamine solutions was examined for 400ppm CO2 absorption at ambient temperature. The absorbents exhibited CO2 absorption with molar ratio of 1 molCO2/molamine, and aqueous isophorone diamine (IPDA) in particular showed >99% CO2 removal even under a 500 mL min−1 flow of 400ppm CO2-N2 with the contact rate of 13,761.5 h−1 between CO2 and IPDA aqueous solution and the CO2 absorption rate of 4.46 mmol/L·min. A precipitate of carbamic acid of IPDA was formed by reaction with CO2, and the CO2 removal efficiency was enhanced by increasing the solution viscosity by the formation of this precipitate. The CO2 was absorbed in aqueous IPDA solution as carbamic acid of IPDA and bicarbonate/carbonate species, and the absorbed CO2 could desorb by heating under O2-containing gas flow, which indicates our system is applicable to the CO2 condensation for a plant growth. This work provides a fundamental information to establishing a solid–liquid phase change system with a high-efficient and environmentally friendly DAC system using aqueous solvent.