New insights from crystallography into the effect of Ni content on ductile-brittle transition temperature of 1000 MPa grade high-strength low-alloy steel

Abstract

The significant effect of Ni content (0.92, 1.94 and 2.94 wt%) on ductile-brittle transition temperature (DBTT) and microstructure in a 1000 MPa grade high-strength low-alloy (HSLA) steel was studied. Using scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), Charpy impact test and low-temperature tensile test to study the fundamental reasons for the effect of Ni content on toughness. The results indicated that increasing the Ni content can reduce the DBTT of HSLA steel and improve the impact toughness at low temperatures. EBSD data post-processing analysis revealed that the key reason for the increase in low-temperature toughness is the refinement of the microstructural crystallographic structure, specifically the significant increase in the boundary density of the block and packet. With the increase of Ni content, the density of grain boundary with an orientation difference greater than 5° between two adjacent {110} crystal planes was higher, which can form a higher density of dislocation pile-up group, thus better reducing local stress concentration. Meanwhile, the stacking fault energy (SFE) increases with the increase of Ni content, which made the screw dislocation more prone to cross slip at low temperature, resulting in an increase in plasticity at low temperatures. These observed phenomena and reasons provided a theoretical explanation for the role of Ni content in reducing DBTT and enhancing the toughness of the core in heavy gauge plates.