{"title":"Enhancing fuel breed-burn performance in a sodium-cooled fast reactor using a novel reactivity control method","authors":"","doi":"10.1016/j.pnucene.2024.105436","DOIUrl":null,"url":null,"abstract":"<div><p>This study aims to enhance the fuel cycle and fissile breeding performance of a sodium-cooled fast breeder reactor (FBR) by utilizing minor actinides (MAs) as a means of reactivity control alongside partially-inserted control rods. Choosing the PFBR-500 as the reference design, four core models, designated as Cases A, B, C, and D, utilizing various proportions of minor actinides (MAs) were built and simulated using OpenMC. The MA concentrations were optimized to compensate for the withdrawal of control rods and ensure the same initial reactivity for all cores. Burnup analysis over 365 EFPDs revealed a significant increase in cycle length and burnup for the modified cores along with a modest rise in breeding ratio. Notably, Case C, employing 3.45 wt.% MAs in the 88 inner-core fuel subassemblies achieved an extra 62.25 EFPDs cycle length, a 33.74% rise in single-cycle burnup, and a 3.86% increase in breeding gain compared to the reference. Loading MAs into the inner-core region proved to be more effective in enhancing both fertile-to-fissile conversion (thus extending the cycle length and fuel burnup) and transmutation than utilizing MAs throughout the core due to greater neutron flux at the core center. While Case D utilizing 2.2 wt.% MAs both in the inner and outer core fuel subassemblies had the highest overall MA loading, it demonstrated lower increments in cycle length, burnup, and breeding gain compared to Case C. Case C also exhibited the highest overall destruction rate (approximately 24%/y) for Np and Am isotopes, and successfully transmuted around 24.08 kg <sup>237</sup>Np, 9.33 kg <sup>241</sup>Am and 3.82 kg <sup>243</sup>Am over the course of a single year. The addition of MAs also achieved a slight flattening of the axial and radial flux profile and a decrease in the flux peaking factor. However, it slightly lowered the beta-effective, Doppler constant, and control rod assembly worth, and shifted the coolant void reactivity worth to the positive side.</p></div>","PeriodicalId":20617,"journal":{"name":"Progress in Nuclear Energy","volume":null,"pages":null},"PeriodicalIF":3.3000,"publicationDate":"2024-09-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Progress in Nuclear Energy","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S014919702400386X","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"NUCLEAR SCIENCE & TECHNOLOGY","Score":null,"Total":0}
引用次数: 0
Abstract
This study aims to enhance the fuel cycle and fissile breeding performance of a sodium-cooled fast breeder reactor (FBR) by utilizing minor actinides (MAs) as a means of reactivity control alongside partially-inserted control rods. Choosing the PFBR-500 as the reference design, four core models, designated as Cases A, B, C, and D, utilizing various proportions of minor actinides (MAs) were built and simulated using OpenMC. The MA concentrations were optimized to compensate for the withdrawal of control rods and ensure the same initial reactivity for all cores. Burnup analysis over 365 EFPDs revealed a significant increase in cycle length and burnup for the modified cores along with a modest rise in breeding ratio. Notably, Case C, employing 3.45 wt.% MAs in the 88 inner-core fuel subassemblies achieved an extra 62.25 EFPDs cycle length, a 33.74% rise in single-cycle burnup, and a 3.86% increase in breeding gain compared to the reference. Loading MAs into the inner-core region proved to be more effective in enhancing both fertile-to-fissile conversion (thus extending the cycle length and fuel burnup) and transmutation than utilizing MAs throughout the core due to greater neutron flux at the core center. While Case D utilizing 2.2 wt.% MAs both in the inner and outer core fuel subassemblies had the highest overall MA loading, it demonstrated lower increments in cycle length, burnup, and breeding gain compared to Case C. Case C also exhibited the highest overall destruction rate (approximately 24%/y) for Np and Am isotopes, and successfully transmuted around 24.08 kg 237Np, 9.33 kg 241Am and 3.82 kg 243Am over the course of a single year. The addition of MAs also achieved a slight flattening of the axial and radial flux profile and a decrease in the flux peaking factor. However, it slightly lowered the beta-effective, Doppler constant, and control rod assembly worth, and shifted the coolant void reactivity worth to the positive side.
期刊介绍:
Progress in Nuclear Energy is an international review journal covering all aspects of nuclear science and engineering. In keeping with the maturity of nuclear power, articles on safety, siting and environmental problems are encouraged, as are those associated with economics and fuel management. However, basic physics and engineering will remain an important aspect of the editorial policy. Articles published are either of a review nature or present new material in more depth. They are aimed at researchers and technically-oriented managers working in the nuclear energy field.
Please note the following:
1) PNE seeks high quality research papers which are medium to long in length. Short research papers should be submitted to the journal Annals in Nuclear Energy.
2) PNE reserves the right to reject papers which are based solely on routine application of computer codes used to produce reactor designs or explain existing reactor phenomena. Such papers, although worthy, are best left as laboratory reports whereas Progress in Nuclear Energy seeks papers of originality, which are archival in nature, in the fields of mathematical and experimental nuclear technology, including fission, fusion (blanket physics, radiation damage), safety, materials aspects, economics, etc.
3) Review papers, which may occasionally be invited, are particularly sought by the journal in these fields.