Research on the Austenite Grain Growth Behavior and Martensitic Phase Transformation Mechanism of 40Cr10Si2Mo Steel via In Situ Observation

Abstract

40Cr10Si2Mo steel is widely utilized because of its excellent mechanical properties, with grain size being a critical factor determining subsequent phase transformation processes and material microstructure performance. This paper reports the use of high-temperature laser scanning confocal microscopy (HT-LSCM) for in situ observation experiments to systematically investigate the growth of austenite grains and the martensitic phase transformation mechanism in 40Cr10Si2Mo steel during an 1800-second isothermal hold at temperatures ranging from 900 °C to 1250 °C. A dynamic model of austenite grain growth is established to optimize the parameters of the austenitic process. The results indicate that the austenite grain size increases continuously with increasing temperature and prolonged time. The Dong model predicts grain sizes that align well with experimental values. Austenite grains grow through grain boundary migration and grain annexation, whereas the precipitation and dissolution of M(Cr, Mo)₂₃C₆ affect grain growth. With prolonged time, some grain boundaries extend into new boundaries through subgrain rotation. The fine grains at lower temperatures reduce the initial temperature of the martensite transition (M_s), and the primary martensite nucleates along the grain boundaries of the prior austenite. The secondary martensite is attached to the primary martensite nucleus at a certain angle and grows in parallel while inhibiting the phase transition of the surrounding untransformed austenite.