A Comparative Analysis of Tensile Characteristics of Epoxy Composites: Assessing TWARMAT, Woven Glass, and Woven Carbon Fiber Reinforcements

IF 1.5 4区材料科学 Q4 MATERIALS SCIENCE, COMPOSITES

Mechanics of Composite Materials Pub Date : 2024-08-20 DOI:10.1007/s11029-024-10226-x

K. Belkaid, H. Aouaichia, D. E. Gaagaia, N. Boutasseta, B. Boubir, A. Deliou

引用次数: 0

Abstract

The tensile characteristics of a novel TWARMAT hybrid fabric with a weight of 600 g/m², comprising aramid and E-glass fibers were assessed. Additionally, a conventional 205-g/m² plain glass and 160-g/m² plain carbon fiber fabrics were also tested for comparison. The results obtained reveal that TWARMAT exhibited superior stiffness and density ratios. To confirm these experimental results, the rule of mixtures was utilized. The close agreement between the two sets of data, with mean relative errors of 5.5 and 1.05% for Young’s modulus and density respectively, confirms the reliability of the methods applied.

Abstract Image

查看原文本刊更多论文

环氧树脂复合材料拉伸特性的比较分析：评估 TWARMAT、玻璃纤维编织物和碳纤维编织物增强材料

对重量为 600 克/平方米、由芳纶和 E 玻璃纤维组成的新型 TWARMAT 混合织物的拉伸特性进行了评估。此外，还测试了 205 克/平方米的传统平纹玻璃纤维织物和 160 克/平方米的平纹碳纤维织物，以进行比较。实验结果表明，TWARMAT 在刚度和密度比方面都更胜一筹。为了证实这些实验结果，使用了混合物法则。两组数据非常接近，杨氏模量和密度的平均相对误差分别为 5.5% 和 1.05%，这证实了所采用方法的可靠性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Mechanics of Composite Materials 工程技术-材料科学：复合

CiteScore

2.90

自引率

17.60%

发文量

审稿时长

12 months

期刊介绍： Mechanics of Composite Materials is a peer-reviewed international journal that encourages publication of original experimental and theoretical research on the mechanical properties of composite materials and their constituents including, but not limited to: damage, failure, fatigue, and long-term strength; methods of optimum design of materials and structures; prediction of long-term properties and aging problems; nondestructive testing; mechanical aspects of technology; mechanics of nanocomposites; mechanics of biocomposites; composites in aerospace and wind-power engineering; composites in civil engineering and infrastructure and other composites applications.