Revolutionizing Waste Management: Solidification of Landfill Leachates Using Alkali-Activated Slag

Abstract

Landfill leachate is a highly hazardous effluent characterized by a high concentration of recalcitrant pollutants, presenting a significant environmental challenge. This study investigated the solidification of landfill leachate contaminants using sodium hydroxide-activated Granulated Blast Furnace Slag (GBFS). The stability of the resulting geopolymer was evaluated through unconfined compressive strength and leaching tests. Optimal curing conditions were identified as 7 days at a sodium hydroxide concentration of 12 M, achieving an unconfined compressive strength of 45.738 MPa at a liquid-to-solid ratio of 15%. A linear relationship was observed between the liquid-to-solid ratio and flow workability, with maximum flow workability evidenced by an average diameter of 242 mm at a liquid-to-solid ratio of 0.25. However, a minimum liquid-to-solid ratio of 0.15 was necessary to obtain a workable mortar. The produced geopolymers were characterized using X-ray Fluorescence (XRF) for mineralogical analysis, Scanning Electron Microscopy (SEM) for morphological examination, and the Toxicity Characteristic Leaching Procedure (TCLP) for leaching tests. The findings demonstrated the successful solidification of landfill leachate using GBFS geopolymer. The leachability tests revealed that the geopolymer did not release metals in concentrations exceeding the allowable limits set by the United States Environmental Protection Agency (USEPA), indicating effective encapsulation of the pollutants within the geopolymer matrix. Furthermore, the resultant geopolymer brick is eco-sustainable and can be classified as a green construction material.