{"title":"Influence of waste glass on the gamma-ray shielding performance of concrete","authors":"","doi":"10.1016/j.anucene.2024.110876","DOIUrl":null,"url":null,"abstract":"<div><p>In this work, the local low-cost materials from Nigeria were companied together to produce a lead-free concrete that can be used in shielding the ionizing γ-rays. This work investigated the impacts of partially replacing coarse aggregates (crushed granite) with a crushed waste glass on the chemical, physical, and radiation shielding characteristics. The developed concretes’ density was measured experimentally, and the fabricated concretes’ elemental chemical composition was determined utilizing a Thermo-Scientific X-ray fluorescence connected to an ARL-QUANT’X-EDXRF-Analyzer. The increase in the waste glass/granite (WG/G) substitution ratio between 0 and 17.6 % decreases the density of the produced concrete from 2.4 g/cm<sup>3</sup> to 2.33 g/cm<sup>3</sup>. On the other hand, the absorption per unit mass (MAC) of the produced concretes increased by raising the WG/G ratio, where there was a 0.217–0.247 cm<sup>2</sup>/g increase in the MAC at 0.081 MeV, by raising the WG/G ratio between 0 and 17.6 %. Simultaneously, the study shows that the radiation protection efficiency (RPE) at 2.506 MeV for a 10 cm thickness of the fabricated concrete reaches 53.49, 61.14, 54.98, and 55.29 % for concretes with WG/G content of 0.0, 5.3, 11.1, and 17.6 % with the same order, respectively. Therefore, the thicker thicknesses of the developed concretes can offer high shielding capacity to be applied in radiation protection applications.</p></div>","PeriodicalId":8006,"journal":{"name":"Annals of Nuclear Energy","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2024-08-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Annals of Nuclear Energy","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0306454924005395","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"NUCLEAR SCIENCE & TECHNOLOGY","Score":null,"Total":0}
引用次数: 0
Abstract
In this work, the local low-cost materials from Nigeria were companied together to produce a lead-free concrete that can be used in shielding the ionizing γ-rays. This work investigated the impacts of partially replacing coarse aggregates (crushed granite) with a crushed waste glass on the chemical, physical, and radiation shielding characteristics. The developed concretes’ density was measured experimentally, and the fabricated concretes’ elemental chemical composition was determined utilizing a Thermo-Scientific X-ray fluorescence connected to an ARL-QUANT’X-EDXRF-Analyzer. The increase in the waste glass/granite (WG/G) substitution ratio between 0 and 17.6 % decreases the density of the produced concrete from 2.4 g/cm3 to 2.33 g/cm3. On the other hand, the absorption per unit mass (MAC) of the produced concretes increased by raising the WG/G ratio, where there was a 0.217–0.247 cm2/g increase in the MAC at 0.081 MeV, by raising the WG/G ratio between 0 and 17.6 %. Simultaneously, the study shows that the radiation protection efficiency (RPE) at 2.506 MeV for a 10 cm thickness of the fabricated concrete reaches 53.49, 61.14, 54.98, and 55.29 % for concretes with WG/G content of 0.0, 5.3, 11.1, and 17.6 % with the same order, respectively. Therefore, the thicker thicknesses of the developed concretes can offer high shielding capacity to be applied in radiation protection applications.
期刊介绍:
Annals of Nuclear Energy provides an international medium for the communication of original research, ideas and developments in all areas of the field of nuclear energy science and technology. Its scope embraces nuclear fuel reserves, fuel cycles and cost, materials, processing, system and component technology (fission only), design and optimization, direct conversion of nuclear energy sources, environmental control, reactor physics, heat transfer and fluid dynamics, structural analysis, fuel management, future developments, nuclear fuel and safety, nuclear aerosol, neutron physics, computer technology (both software and hardware), risk assessment, radioactive waste disposal and reactor thermal hydraulics. Papers submitted to Annals need to demonstrate a clear link to nuclear power generation/nuclear engineering. Papers which deal with pure nuclear physics, pure health physics, imaging, or attenuation and shielding properties of concretes and various geological materials are not within the scope of the journal. Also, papers that deal with policy or economics are not within the scope of the journal.