{"title":"Experimental study of heat transfer effects due to impinging slot jets confined by inclined plates","authors":"Haluk Keleş, Yücel Özmen","doi":"10.1615/heattransres.2024053359","DOIUrl":null,"url":null,"abstract":"In this study, the effects of heat transfer in turbulent flow fields of impinging slot jet confined by inclined plates were investigated experimentally. Temperature distributions on the impingement plates were obtained with thermal camera. Temperature measurements were carried out on the impingement plate in four different impinging slot jet flow setups confined by plates with inclination angles of θ = 0°, 15°, 30° and 45°, with an inter-plate spacing of 0.5 ≤ H/W ≤ 6 and a Reynolds number range of 10000 ≤ Re ≤ 30000. The effects of confinement plate inclination angle, intervals among plates and Reynolds number on the Nusselt distributions of the impingement plates were examined. It was observed that Nusselt values increased with increasing Reynolds number and decreased with increasing intervals among plates. There are secondary top points in the Nusselt distributions on the impingement plate for low inclined confinement plates (θ=0° and θ=15°) and low inter-plate spacings (H/W=0. 5 and H/W=1), while there is an increase in the Nusselt numbers at the ends of the impingement plate for high inclined confinement plates (θ=30° and θ=45°) and low inter-plate spacings (H/W=0.5 and H/W=1).","PeriodicalId":50408,"journal":{"name":"Heat Transfer Research","volume":"163 1","pages":""},"PeriodicalIF":1.7000,"publicationDate":"2024-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Heat Transfer Research","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1615/heattransres.2024053359","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"THERMODYNAMICS","Score":null,"Total":0}
引用次数: 0
Abstract
In this study, the effects of heat transfer in turbulent flow fields of impinging slot jet confined by inclined plates were investigated experimentally. Temperature distributions on the impingement plates were obtained with thermal camera. Temperature measurements were carried out on the impingement plate in four different impinging slot jet flow setups confined by plates with inclination angles of θ = 0°, 15°, 30° and 45°, with an inter-plate spacing of 0.5 ≤ H/W ≤ 6 and a Reynolds number range of 10000 ≤ Re ≤ 30000. The effects of confinement plate inclination angle, intervals among plates and Reynolds number on the Nusselt distributions of the impingement plates were examined. It was observed that Nusselt values increased with increasing Reynolds number and decreased with increasing intervals among plates. There are secondary top points in the Nusselt distributions on the impingement plate for low inclined confinement plates (θ=0° and θ=15°) and low inter-plate spacings (H/W=0. 5 and H/W=1), while there is an increase in the Nusselt numbers at the ends of the impingement plate for high inclined confinement plates (θ=30° and θ=45°) and low inter-plate spacings (H/W=0.5 and H/W=1).
期刊介绍:
Heat Transfer Research (ISSN1064-2285) presents archived theoretical, applied, and experimental papers selected globally. Selected papers from technical conference proceedings and academic laboratory reports are also published. Papers are selected and reviewed by a group of expert associate editors, guided by a distinguished advisory board, and represent the best of current work in the field. Heat Transfer Research is published under an exclusive license to Begell House, Inc., in full compliance with the International Copyright Convention. Subjects covered in Heat Transfer Research encompass the entire field of heat transfer and relevant areas of fluid dynamics, including conduction, convection and radiation, phase change phenomena including boiling and solidification, heat exchanger design and testing, heat transfer in nuclear reactors, mass transfer, geothermal heat recovery, multi-scale heat transfer, heat and mass transfer in alternative energy systems, and thermophysical properties of materials.