Experimental Investigation on Thermal Performance of Solar Air Heater using Nano-PCM

Abstract

Herein, the performance of a solar air heater (SAH) is experimentally investigated, utilising an array of tubes as the absorbent part. The study evaluates the impact of incorporating Al2O3-paraffin wax as a non-PCM storage medium in comparison to a traditional flat-plate solar air heater, specifically under Najaf-Iraq climate conditions. The SAH is positioned at an inclination of 32.1 degrees with respect to the horizon, allowing it to align optimally with the solar direction. The results reveal notable differences in thermal performance characteristics among the various models. The highest thermal efficiency values are observed for distinct configurations: the proposed model achieves about 55.2%, the wax-supported model reaches 55.9%, and the nano-PCM-reinforced model attains 57.7%, while the traditional model lags at 48.2%. Furthermore, an analysis of different air mass flow rates highlights a crucial finding. Specifically, an air mass flow rate of 0.01 kg/s results in a higher temperature exiting from the system compared to a flow rate of 0.02 kg/s. This is attributed to the extended interaction time between the passing air and the absorbing surface, facilitating enhanced heat exchange. Consequently, the system's thermal efficiency experiences an increase. The study underscores the superior thermal performance and efficiency of the tube array nano-PCM collector type under Najaf city-Iraq climate conditions.