Transfer mechanism of printed patterns on a soft film to metal surface in compression

IF 3.2 3区工程技术 Q2 ENGINEERING, INDUSTRIAL

Cirp Annals-Manufacturing Technology Pub Date : 2024-01-01 DOI:10.1016/j.cirp.2024.04.017

引用次数: 0

Abstract

The transfer mechanism of a toner pattern printed on a soft film using a laser printer to a metal surface in compression was investigated by experiment and computer simulations. The toner pattern can be transferred successfully to the workpiece surface under the conditions that the entire soft film continues to be squeezed out smoothly from the workpiece edge until the transfer process is completed. The results indicate that the average tool pressure needed for the complete transfer of the toner pattern to the workpiece surface can be predicted by the average compression pressure calculated with slab method

查看原文本刊更多论文

软薄膜上的印刷图案在压缩过程中向金属表面的转移机制

通过实验和计算机模拟，研究了用激光打印机在软薄膜上打印的墨粉图案在压缩状态下转移到金属表面的机理。在整个软薄膜继续从工件边缘平滑挤出直至完成转移过程的条件下，墨粉图案可以成功转移到工件表面。结果表明，墨粉图案完全转移到工件表面所需的平均工具压力可以通过板坯法计算出的平均压缩压力来预测

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Cirp Annals-Manufacturing Technology 工程技术-工程：工业

CiteScore

7.50

自引率

9.80%

发文量

137

审稿时长

13.5 months

期刊介绍： CIRP, The International Academy for Production Engineering, was founded in 1951 to promote, by scientific research, the development of all aspects of manufacturing technology covering the optimization, control and management of processes, machines and systems. This biannual ISI cited journal contains approximately 140 refereed technical and keynote papers. Subject areas covered include: Assembly, Cutting, Design, Electro-Physical and Chemical Processes, Forming, Abrasive processes, Surfaces, Machines, Production Systems and Organizations, Precision Engineering and Metrology, Life-Cycle Engineering, Microsystems Technology (MST), Nanotechnology.