Treatment and Desalination of Wastewater Generated After Steel Degreasing and Pickling in the Tunisian Galvanization Industry

H. Cherif, M. Wakkel, Refka Korbsi, Insaf Krim, H. Elfil
{"title":"Treatment and Desalination of Wastewater Generated After Steel Degreasing and Pickling in the Tunisian Galvanization Industry","authors":"H. Cherif, M. Wakkel, Refka Korbsi, Insaf Krim, H. Elfil","doi":"10.37256/epr.4120243976","DOIUrl":null,"url":null,"abstract":"A case study of galvanization wastewater treatment was carried out to preserve the environment and to suggest a solution to the Metal Galvanization of Poulina Group Holding MBG-Galva industry located in Tunisia for reducing effluent organic matter, heavy metals, and salt contents. The current industry had two baths of rinsing water after steel degreasing and pickling steps. The chemical oxygen demand (COD) and pH of the first bath were very high compared to the second bath, which exhibits a low pH with high salinity and high heavy metals contents. Coagulation-flocculation and electrodialysis were examined as treatment processes for rinse water obtained after steel degreasing, while precipitation-oxidation and membrane distillation were combined for pickling rinse water treatment. Aluminum sulfate and sodium alginate were used, respectively, as coagulants and flocculents under optimal conditions determined through the Jar test. After the electrodialysis step, the removal rates were found to be 89.6% for conductivity, 93% for COD, 90 to 96% for salt content, and 82% to 99.5% for heavy metals. For the second effluent, the conductivity of wastewater was reduced by 97%, and heavy metals and COD were removed. The lab-scale experiment implementation proved that using the current process has a high impact on obtaining zero liquid reject in the manufactory, and reusing it in the same bath is an opportunity for water preservation. Solid waste characterized by X-rays showed that lead oxide and iron can be recovered from galvanization industry wastewater. Scaling the combined pretreatment and desalination system in a demonstration unit helps the galvanization industry reuse the water in the same industry and prevent environmental pollution.","PeriodicalId":425752,"journal":{"name":"Environmental Protection Research","volume":"92 5","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Environmental Protection Research","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.37256/epr.4120243976","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

A case study of galvanization wastewater treatment was carried out to preserve the environment and to suggest a solution to the Metal Galvanization of Poulina Group Holding MBG-Galva industry located in Tunisia for reducing effluent organic matter, heavy metals, and salt contents. The current industry had two baths of rinsing water after steel degreasing and pickling steps. The chemical oxygen demand (COD) and pH of the first bath were very high compared to the second bath, which exhibits a low pH with high salinity and high heavy metals contents. Coagulation-flocculation and electrodialysis were examined as treatment processes for rinse water obtained after steel degreasing, while precipitation-oxidation and membrane distillation were combined for pickling rinse water treatment. Aluminum sulfate and sodium alginate were used, respectively, as coagulants and flocculents under optimal conditions determined through the Jar test. After the electrodialysis step, the removal rates were found to be 89.6% for conductivity, 93% for COD, 90 to 96% for salt content, and 82% to 99.5% for heavy metals. For the second effluent, the conductivity of wastewater was reduced by 97%, and heavy metals and COD were removed. The lab-scale experiment implementation proved that using the current process has a high impact on obtaining zero liquid reject in the manufactory, and reusing it in the same bath is an opportunity for water preservation. Solid waste characterized by X-rays showed that lead oxide and iron can be recovered from galvanization industry wastewater. Scaling the combined pretreatment and desalination system in a demonstration unit helps the galvanization industry reuse the water in the same industry and prevent environmental pollution.
突尼斯镀锌业钢铁脱脂和酸洗后废水的处理和脱盐
为了保护环境,对位于突尼斯的普利纳集团控股公司(MBG-Galva)的金属镀锌工业进行了镀锌废水处理案例研究,提出了减少废水中有机物、重金属和盐分含量的解决方案。目前,该行业在钢材脱脂和酸洗步骤后有两个冲洗水池。与第二个水槽相比,第一个水槽的化学需氧量(COD)和 pH 值都很高,而第二个水槽的 pH 值较低,盐度和重金属含量都很高。混凝-絮凝和电渗析被视为钢铁脱脂后冲洗水的处理工艺,而沉淀-氧化和膜蒸馏则被用于酸洗冲洗水的处理。在 Jar 试验确定的最佳条件下,分别使用硫酸铝和海藻酸钠作为混凝剂和絮凝剂。经过电渗析步骤后,电导率的去除率为 89.6%,化学需氧量的去除率为 93%,含盐量的去除率为 90% 至 96%,重金属的去除率为 82% 至 99.5%。对于第二种出水,废水的电导率降低了 97%,重金属和化学需氧量也得到了去除。实验室规模的实验证明,采用目前的工艺对获得工厂零废液有很大的影响,而且在同一浴槽中重复使用废液是保护水资源的一个机会。用 X 射线表征固体废物表明,可以从镀锌工业废水中回收氧化铅和铁。在示范装置中推广预处理和脱盐组合系统有助于镀锌行业在同一行业中重复用水,防止环境污染。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书