Quantifying the Impact of Drilling Parameters on Temperature Elevation within Bone during the Process of Implant Site Preparation

Md Ashequl Islam, Nur Saifullah Kamarrudin, Ruslizam Daud, Ishak Ibrahim, Shahriman Abu Bakar, Siti Noor Fazliah Mohd Noor
{"title":"Quantifying the Impact of Drilling Parameters on Temperature Elevation within Bone during the Process of Implant Site Preparation","authors":"Md Ashequl Islam, Nur Saifullah Kamarrudin, Ruslizam Daud, Ishak Ibrahim, Shahriman Abu Bakar, Siti Noor Fazliah Mohd Noor","doi":"10.37934/aram.116.1.112","DOIUrl":null,"url":null,"abstract":"This study aimed to elucidate the influences of several drilling parameters on bone temperature during drilling, as excessive heat generation can cause thermal bone damage and affect post-surgery recovery. In vitro drilling tests were conducted on bovine femoral shaft cortical bone specimens. The parameters considered included tool rotational speed (s), feed rate (f), tool diameter (d), and drill tip angles of 118° and 135°. Drilling temperatures were studied across a range of 800–2000 rpm rotational speeds, 20–40 mm/min feed rates, and 2–4 mm drill diameters. A predictive statistical model was constructed using the response surface methodology (RSM). Analysis of variance (ANOVA) at a 95% confidence level (α = 0.05) revealed that rotational speed significantly impacted temperature increase, contributing to 59.74% of observed temperature rises. Drill diameter accounted for 16.21% of temperature variations, while feed rate contributed to 10.04% of the temperature rises. The study provides valuable insights into the predominant factors affecting bone temperature during drilling. Understanding these parameters and their interplay is pivotal for optimizing drilling conditions and minimizing potential thermal damage to bones.","PeriodicalId":475560,"journal":{"name":"Journal of Advanced Research in Applied Mechanics","volume":"11 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-05-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Advanced Research in Applied Mechanics","FirstCategoryId":"0","ListUrlMain":"https://doi.org/10.37934/aram.116.1.112","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

This study aimed to elucidate the influences of several drilling parameters on bone temperature during drilling, as excessive heat generation can cause thermal bone damage and affect post-surgery recovery. In vitro drilling tests were conducted on bovine femoral shaft cortical bone specimens. The parameters considered included tool rotational speed (s), feed rate (f), tool diameter (d), and drill tip angles of 118° and 135°. Drilling temperatures were studied across a range of 800–2000 rpm rotational speeds, 20–40 mm/min feed rates, and 2–4 mm drill diameters. A predictive statistical model was constructed using the response surface methodology (RSM). Analysis of variance (ANOVA) at a 95% confidence level (α = 0.05) revealed that rotational speed significantly impacted temperature increase, contributing to 59.74% of observed temperature rises. Drill diameter accounted for 16.21% of temperature variations, while feed rate contributed to 10.04% of the temperature rises. The study provides valuable insights into the predominant factors affecting bone temperature during drilling. Understanding these parameters and their interplay is pivotal for optimizing drilling conditions and minimizing potential thermal damage to bones.
量化钻孔参数对种植部位准备过程中骨内温度升高的影响
本研究旨在阐明钻孔过程中几个钻孔参数对骨温度的影响,因为过多的热量会造成骨热损伤,影响术后恢复。对牛股骨柄皮质骨标本进行了体外钻孔试验。考虑的参数包括刀具转速(s)、进给率(f)、刀具直径(d)以及 118° 和 135° 的钻尖角。在 800-2000 rpm 转速、20-40 毫米/分钟进给速度和 2-4 毫米钻头直径范围内对钻孔温度进行了研究。采用响应面方法 (RSM) 建立了预测统计模型。在 95% 置信度(α = 0.05)下进行的方差分析(ANOVA)显示,转速对温度升高有显著影响,占观察到的温度升高的 59.74%。钻头直径占温度变化的 16.21%,而进给量占温度上升的 10.04%。这项研究为了解钻孔过程中影响骨温的主要因素提供了宝贵的见解。了解这些参数及其相互作用对于优化钻孔条件和最大限度地减少对骨骼的潜在热损伤至关重要。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书