The research on high efficiency water injection development of carbonate rock reservoir in the middle east

Abstract

More and more attention has been paid to the waterflood development of carbonate reservoir in the Middle East with continuous expansion of the scale of carbonate reservoir development. Strong non-homogeneity of carbonate reservoirs results in serious conflicts between injection and production, causing low degree of water-driven control in the well network, and low degree of vertical mobilization. This article takes the main reservoir of an oil field in the Middle East region as an example, combining geological evaluation, dynamic analysis, and reservoir development strategies to study the effectiveness of water injection development in carbonate reservoirs. It shows that there is a correlation between pore type, oil-water relative permeability, and development method in the development of carbonate reservoirs. For reservoirs with matrix pores and micropores, water injection should be strengthened in the later stage of development; for reservoirs with dissolved pores and coarse pores, the iso-permeability point is relatively high, and the later development should focus on balanced water injection. Three different waterflooding models for formation development are designed to verify the feasibility of fine waterflooding schemes. The main differences are that one set of well patterns is combined injection and production, and three sets of well patterns are layered system waterflooding. The results show that the development effect in layered system waterflooding is the best. The daily production can be increased by about 16%, the cumulative oil production can be increased by about 8%, and the recovery factor can be increased by about 3%. Eventually, the stable oil and water control of carbonate reservoir can be realized.