DRAG COEFFICIENT OF A CYLINDER WITH A FLAT PLATE PLACED BEHIND IT

IF 0.5 4区工程技术 Q4 MECHANICS

Journal of Applied Mechanics and Technical Physics Pub Date : 2024-02-13 DOI:10.1134/S0021894423060081

V. A. Frolov, Le Van Ha

引用次数: 0

Abstract

A passive method for reducing the drag of a cylinder by placing a flat plate behind it at a Reynolds number Re=10⁵ has been studied. The paper presents the results of an ANSYS Fluent simulation of the flow around a cylinder–plate system, including the velocity and pressure fields, streamlines, and the dependences of the drag coefficient and the position of the separation point on the surface of the cylinder on the relative length of the plate. It has been found that the drag coefficient of the cylinder–plate system can be reduced by approximately 40% compared to the case of an isolated cylinder.

Abstract Image

查看原文本刊更多论文

后面有平板的圆柱体的阻力系数

摘要研究了在雷诺数 Re=105 条件下，通过在气缸后面放置一块平板来减少气缸阻力的被动方法。论文介绍了 ANSYS Fluent 对圆柱体-平板系统周围流动的模拟结果，包括速度场和压力场、流线、阻力系数以及圆柱体表面分离点位置与平板相对长度的关系。研究发现，与孤立的气缸相比，气缸-板系统的阻力系数可降低约 40%。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Applied Mechanics and Technical Physics 物理-力学

CiteScore

1.20

自引率

16.70%

发文量

审稿时长

4-8 weeks

期刊介绍： Journal of Applied Mechanics and Technical Physics is a journal published in collaboration with the Siberian Branch of the Russian Academy of Sciences. The Journal presents papers on fluid mechanics and applied physics. Each issue contains valuable contributions on hypersonic flows; boundary layer theory; turbulence and hydrodynamic stability; free boundary flows; plasma physics; shock waves; explosives and detonation processes; combustion theory; multiphase flows; heat and mass transfer; composite materials and thermal properties of new materials, plasticity, creep, and failure.