Effect of asymmetric leading edge on transition of suction side

Abstract

Asymmetric leading edge offers several advantages over conventional leading edge. However, there are few related published research on compressor blades. This study proposes a blade parameterization method that superimposing the thickness distribution on the camber line at the middle and curve fitting at the leading and trailing edges. This parameterization method is applied to a stator in the final stage of an axial compressor, and numerical simulation is used to calculate the aerodynamic performance at various attack angles under the designed inlet Mach number. There is an optimal deflection angle regardless of which side of the leading edge deflects, and deflection toward the pressure side is conducive to the suppression of separation bubble near the leading edge at positive attack angle. When the maximum curvature of the pressure side is decreased, the operating range changed slightly, but the positive attack angle range grew from 5.166° to 5.466°.