Adhesion Strength of TiN Coatings Deposited on VT1-0 Titanium with Different Surface Conditions

IF 0.7 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Materials Science Pub Date : 2024-04-22 DOI:10.1007/s11003-024-00800-y

H. H. Veselivska, I. M. Pohrelyuk, R. V. Proskurnyak, O. S. Kuprin

引用次数: 0

Abstract

The TiN coating obtained by vacuum-arc spraying on the surface of commercially pure VT1-0 titanium and thermodiffusion saturation in a nitrogen atmosphere was studied. The coating was evaluated by thickness, phase composition, surface roughness, microhardness, and adhesive strength. Rockwell adhesion tests showed that the TiN coatings applied to both untreated and pre-nitrided titanium meet the HF2 adhesion level accepted for commercial application on products.

Abstract Image

查看原文本刊更多论文

不同表面条件下 VT1-0 钛上沉积的 TiN 涂层的附着强度

研究了在商业纯钛 VT1-0 表面进行真空电弧喷涂并在氮气环境中进行热扩散饱和而获得的 TiN 涂层。涂层的厚度、相组成、表面粗糙度、显微硬度和粘合强度都得到了评估。洛氏硬度附着力测试表明，应用于未处理钛和预氮化钛的 TiN 涂层都达到了产品商业应用所认可的 HF2 附着力水平。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Materials Science 工程技术-材料科学：综合

CiteScore

1.60

自引率

44.40%

发文量

审稿时长

4-8 weeks

期刊介绍： Materials Science reports on current research into such problems as cracking, fatigue and fracture, especially in active environments as well as corrosion and anticorrosion protection of structural metallic and polymer materials, and the development of new materials.