{"title":"Numerical and Experimental Investigation on Cyclic Behavior of Masonry Infill Walls Retrofitted with CFRP","authors":"","doi":"10.1007/s40999-024-00955-4","DOIUrl":null,"url":null,"abstract":"<h3>Abstract</h3> <p>This paper presents verification of the numerical model of masonry infill walls against the experimental results. Three cases are investigated: an undamaged model, a damaged model, and a carbon fiber-reinforced polymer (CFRP) strip. ABAQUS commercial finite element model (FEM) software was used in the modeling. Nonlinear behavior as well as cracking and crushing of masonry bricks were simulated using the Concrete Damaged Plasticity (CDP) model. To solve this, a three-dimensional simplified micro-model was used. Experimental and simulation of the hysteresis curve, skeleton curve, damage patterns, maximum and minimum stresses, and plane strain distribution were compared. The changes in natural frequencies, and mode shapes before and after CFRP strengthening masonry wall are evaluated. A sensitivity analysis was done to study the effect of damage and strengthening on the nonlinear behavior of steel frames with masonry infill. This investigation demonstrated that the numerical model was able to effectively simulate and predict the strength of these models. Then a look at the effect on seismic performance is reported and commented on.</p>","PeriodicalId":50331,"journal":{"name":"International Journal of Civil Engineering","volume":"68 1","pages":""},"PeriodicalIF":1.8000,"publicationDate":"2024-04-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Civil Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s40999-024-00955-4","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 0
Abstract
This paper presents verification of the numerical model of masonry infill walls against the experimental results. Three cases are investigated: an undamaged model, a damaged model, and a carbon fiber-reinforced polymer (CFRP) strip. ABAQUS commercial finite element model (FEM) software was used in the modeling. Nonlinear behavior as well as cracking and crushing of masonry bricks were simulated using the Concrete Damaged Plasticity (CDP) model. To solve this, a three-dimensional simplified micro-model was used. Experimental and simulation of the hysteresis curve, skeleton curve, damage patterns, maximum and minimum stresses, and plane strain distribution were compared. The changes in natural frequencies, and mode shapes before and after CFRP strengthening masonry wall are evaluated. A sensitivity analysis was done to study the effect of damage and strengthening on the nonlinear behavior of steel frames with masonry infill. This investigation demonstrated that the numerical model was able to effectively simulate and predict the strength of these models. Then a look at the effect on seismic performance is reported and commented on.
期刊介绍：
International Journal of Civil Engineering, The official publication of Iranian Society of Civil Engineering and Iran University of Science and Technology is devoted to original and interdisciplinary, peer-reviewed papers on research related to the broad spectrum of civil engineering with similar emphasis on all topics.The journal provides a forum for the International Civil Engineering Community to present and discuss matters of major interest e.g. new developments in civil regulations, The topics are included but are not necessarily restricted to :- Structures- Geotechnics- Transportation- Environment- Earthquakes- Water Resources- Construction Engineering and Management, and New Materials.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
