Conversion of Lithium Chloride into Lithium Hydroxide Using a Two-Step Solvent Extraction Process in an Agitated Kühni Column

Abstract

A significant consequence of the green transition is the growing demand of lithium-ion batteries (LIBs), as they are essential for electrical vehicles. In turn, the demand for the raw materials that are needed to produce LIBs is increasing. A common LIB cathode type for electrical cars is lithium nickel manganese cobalt oxide (NMC). Since cobalt is currently considered as a critical raw material, nickel-rich NMC cathodes are now designed with lower cobalt contents. The synthesis of these new NMC types requires LiOH instead of Li₂CO₃, which was used for Co-richer NMC materials in the past. Most production routes of LiOH start from Li₂CO₃ or Li₂SO₄. However, LiCl could also be a potential precursor for LiOH, as it could be obtained from various lithium sources. A two-step solvent extraction process (SX) was developed for direct conversion of LiCl into LiOH, using a phenol (butylhydroxytoluene or BHT) and a mixture of quaternary ammonium chlorides (Aliquat 336) in an aliphatic diluent (Shellsol D70) as the solvent. The SX process was validated in counter-current mode using a rotary agitated Kühni extraction column. The use of a column instead of mixer-settlers reduced the CO₂ uptake by the final product (LiOH), which prevented the partial conversion of LiOH to Li₂CO₃. A total of 75 L of LiCl feed solution was processed in the Kühni column to obtain a solution of LiOH with a final purity of more than 99.95%, at a yield of 96%.

Graphical Abstract