Assessment on Bond Strength of CFRP Sheet Bonded to Concrete Focused on Sheet Stiffness

IF 1.6 4区工程技术 Q3 CONSTRUCTION & BUILDING TECHNOLOGY

Journal of Advanced Concrete Technology Pub Date : 2024-04-05 DOI:10.3151/jact.22.190

Mitsuhiko Ozaki, Yasuhiko Sato, Eiji Yoshida, Aya Takeuchi, Yuta Yamada, Fumiaki Nagashima

{"title":"Assessment on Bond Strength of CFRP Sheet Bonded to Concrete Focused on Sheet Stiffness","authors":"Mitsuhiko Ozaki, Yasuhiko Sato, Eiji Yoshida, Aya Takeuchi, Yuta Yamada, Fumiaki Nagashima","doi":"10.3151/jact.22.190","DOIUrl":null,"url":null,"abstract":"In previous studies on the bond behaviors of FRP sheets attached to concrete, specimens for bond tests that contained FRP sheets with relatively low stiffnesses were used. However, in actual strengthening design, high stiffnesses of FRP sheets are required because the scale of the structure is very large. Therefore, in this study, bond tests were conducted using specimens with many different sheet stiffnesses and with polyurea resin. As a result, the bond strength increased as the stiffness increased with multiple CFRP sheets. Nevertheless, existing bond strength models overestimated the bond strength when the stiffness exceeded 200 kN/mm. In addition, 3D scanning measurements of patterned and indented concrete thin layers behind CFRP sheets revealed that the interfacial fracture energy was strongly related to the surface area of the concrete thin layer, not to the CFRP sheet stiffness or the resin properties.This paper is an English translation of the authors’ previous work [Ozaki, M., Sato, Y., Yoshida, E., Takeuchi, A., Yamada, Y. and Nagashima, F., (2023). “Assessment on bond strength of CFRP sheet bonded to concrete focused on sheet stiffness.” Journal of JSCE, 79(6), 22-00289. (in Japanese)].\n","PeriodicalId":14868,"journal":{"name":"Journal of Advanced Concrete Technology","volume":null,"pages":null},"PeriodicalIF":1.6000,"publicationDate":"2024-04-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Advanced Concrete Technology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3151/jact.22.190","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}

引用次数: 0

Abstract

In previous studies on the bond behaviors of FRP sheets attached to concrete, specimens for bond tests that contained FRP sheets with relatively low stiffnesses were used. However, in actual strengthening design, high stiffnesses of FRP sheets are required because the scale of the structure is very large. Therefore, in this study, bond tests were conducted using specimens with many different sheet stiffnesses and with polyurea resin. As a result, the bond strength increased as the stiffness increased with multiple CFRP sheets. Nevertheless, existing bond strength models overestimated the bond strength when the stiffness exceeded 200 kN/mm. In addition, 3D scanning measurements of patterned and indented concrete thin layers behind CFRP sheets revealed that the interfacial fracture energy was strongly related to the surface area of the concrete thin layer, not to the CFRP sheet stiffness or the resin properties.

This paper is an English translation of the authors’ previous work [Ozaki, M., Sato, Y., Yoshida, E., Takeuchi, A., Yamada, Y. and Nagashima, F., (2023). “Assessment on bond strength of CFRP sheet bonded to concrete focused on sheet stiffness.” Journal of JSCE, 79(6), 22-00289. (in Japanese)].

查看原文本刊更多论文

以片材刚度为重点评估与混凝土粘接的 CFRP 片材的粘接强度

在以往关于附着在混凝土上的 FRP 片材的粘结行为的研究中，粘结试验中使用的试样包含刚度相对较低的 FRP 片材。然而，在实际加固设计中，由于结构的规模非常大，因此需要高刚度的 FRP 片材。因此，在本研究中，使用了多种不同刚度的板材试样和聚脲树脂进行了粘接试验。结果发现，随着多个 CFRP 片材刚度的增加，粘接强度也随之增加。然而，当刚度超过 200 kN/mm 时，现有的粘接强度模型高估了粘接强度。此外，对 CFRP 片材后面的混凝土薄层的图案和凹陷进行的三维扫描测量显示，界面断裂能与混凝土薄层的表面积密切相关，而与 CFRP 片材的刚度或树脂特性无关。"以片材刚度为重点的 CFRP 片材与混凝土粘结强度评估"。JSCE期刊，79（6），22-00289。(日文）]。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Journal of Advanced Concrete Technology 工程技术-材料科学：综合

CiteScore

3.70

自引率

10.00%

发文量

审稿时长

3.5 months

期刊介绍： JACT is fast. Only 5 to 7 months from submission to publishing thanks to electronic file exchange between you, the reviewers and the editors. JACT is high quality. Peer-reviewed by internationally renowned experts who return review comments to ensure the highest possible quality. JACT is transparent. The status of your manuscript from submission to publishing can be viewed on our website, greatly reducing the frustration of being kept in the dark, possibly for over a year in the case of some journals. JACT is cost-effective. Submission and subscription are free of charge . Full-text PDF files are available for the authors to open at their web sites. Scope: *Materials: -Material properties -Fresh concrete -Hardened concrete -High performance concrete -Development of new materials -Fiber reinforcement *Maintenance and Rehabilitation: -Durability and repair -Strengthening/Rehabilitation -LCC for concrete structures -Environmant conscious materials *Structures: -Design and construction of RC and PC Structures -Seismic design -Safety against environmental disasters -Failure mechanism and non-linear analysis/modeling -Composite and mixed structures *Other: -Monitoring -Aesthetics of concrete structures -Other concrete related topics