V. Sokolenko, V.I. Zhurba, E. Karaseva, A. Mats, E. S. Savchuk, V. A. Frolov
{"title":"CREEP OF VT1-0 TITANIUM ALLOY IN DIFFERENT STRUCTURE STATES AFTER IRRADIATION WITH HELIUM IONS","authors":"V. Sokolenko, V.I. Zhurba, E. Karaseva, A. Mats, E. S. Savchuk, V. A. Frolov","doi":"10.46813/2024-149-154","DOIUrl":null,"url":null,"abstract":"The effect of irradiation with helium ions at T = 350°C with an energy of 20 keV and a dose of 1.5·1018 Не/cm2 on the structure and properties of VT1-0 titanium alloy in the initial and nanostructural states was studied. It has been shown that irradiation of VT1-0 samples in the initial state leads to a decrease in mechanical properties when tested under creep conditions at T = 350 °C, which may be due to dynamic recovery. A material in a nanostructured state is characterized by an increase in strength and creep rate at a test temperature of T = 350°C, while maintaining a plasticity reserve. The effect is associated with the structure rearrangement, grain growth and the development of strain hardening processes as the effective stress increases.","PeriodicalId":510408,"journal":{"name":"Problems of Atomic Science and Technology","volume":"42 10","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Problems of Atomic Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.46813/2024-149-154","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Abstract
The effect of irradiation with helium ions at T = 350°C with an energy of 20 keV and a dose of 1.5·1018 Не/cm2 on the structure and properties of VT1-0 titanium alloy in the initial and nanostructural states was studied. It has been shown that irradiation of VT1-0 samples in the initial state leads to a decrease in mechanical properties when tested under creep conditions at T = 350 °C, which may be due to dynamic recovery. A material in a nanostructured state is characterized by an increase in strength and creep rate at a test temperature of T = 350°C, while maintaining a plasticity reserve. The effect is associated with the structure rearrangement, grain growth and the development of strain hardening processes as the effective stress increases.