Effect of Ti and C addition on oxidation resistance of FeCoCrNiMn high entropy alloys prepared by powder metallurgy

IF 2.3 4区材料科学 Q2 METALLURGY & METALLURGICAL ENGINEERING

Anti-corrosion Methods and Materials Pub Date : 2024-03-26 DOI:10.1108/acmm-11-2023-2918

Haichao Wang, Xiaoqiang Liu, Zhanjiang Li, Li Chen, Pinqiang Dai, Qunhua Tang

{"title":"Effect of Ti and C addition on oxidation resistance of FeCoCrNiMn high entropy alloys prepared by powder metallurgy","authors":"Haichao Wang, Xiaoqiang Liu, Zhanjiang Li, Li Chen, Pinqiang Dai, Qunhua Tang","doi":"10.1108/acmm-11-2023-2918","DOIUrl":null,"url":null,"abstract":"<h3>Purpose</h3>\n<p>The purpose of this paper is to study the high temperature oxidation behavior of Ti and C-added FeCoCrNiMn high entropy alloys (HEAs).</p>\n<h3>Design/methodology/approach</h3>\n<p>Cyclic oxidation method was used to obtain the oxidation kinetic profile and oxidation rate. The microstructures of the surface and cross section of the samples after oxidation were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM).</p>\n<h3>Findings</h3>\n<p>The results show that the microstructure of the alloy mainly consisted of FCC (Face-centered Cubic Structure) main phase and carbides (M<sub>7</sub>C<sub>3</sub>, M<sub>23</sub>C<sub>6</sub> and TiC). With the increase of Ti and C content, the microhardness, strength and oxidation resistance of the alloy were effectively improved. After oxidation at a constant temperature of 800 °C for 100 h, the preferential oxidation of chromium in the chromium carbide determined the early formation of dense chromium oxide layers compared to the HEAs substrate, resulting in the optimal oxidation resistance of the TC30 alloy.</p>\n<h3>Originality/value</h3>\n<p>More precipitated CrC can preferentially oxidize and rapidly form a dense Cr<sub>2</sub>O<sub>3</sub> layer early in the oxidation, which will slow down the further oxidation of the alloy.</p>","PeriodicalId":8217,"journal":{"name":"Anti-corrosion Methods and Materials","volume":"54 1","pages":""},"PeriodicalIF":2.3000,"publicationDate":"2024-03-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Anti-corrosion Methods and Materials","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1108/acmm-11-2023-2918","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}

引用次数: 0

Abstract

Purpose

The purpose of this paper is to study the high temperature oxidation behavior of Ti and C-added FeCoCrNiMn high entropy alloys (HEAs).

Design/methodology/approach

Cyclic oxidation method was used to obtain the oxidation kinetic profile and oxidation rate. The microstructures of the surface and cross section of the samples after oxidation were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM).

Findings

The results show that the microstructure of the alloy mainly consisted of FCC (Face-centered Cubic Structure) main phase and carbides (M₇C₃, M₂₃C₆ and TiC). With the increase of Ti and C content, the microhardness, strength and oxidation resistance of the alloy were effectively improved. After oxidation at a constant temperature of 800 °C for 100 h, the preferential oxidation of chromium in the chromium carbide determined the early formation of dense chromium oxide layers compared to the HEAs substrate, resulting in the optimal oxidation resistance of the TC30 alloy.

Originality/value

More precipitated CrC can preferentially oxidize and rapidly form a dense Cr₂O₃ layer early in the oxidation, which will slow down the further oxidation of the alloy.

查看原文本刊更多论文

添加 Ti 和 C 对粉末冶金制备的铁钴铬镍锰高熵合金抗氧化性的影响

目的本文旨在研究 Ti 和添加 C 的铁钴铬镍锰高熵合金（HEAs）的高温氧化行为。结果表明，合金的微观结构主要由 FCC（面心立方结构）主相和碳化物（M7C3、M23C6 和 TiC）组成。随着 Ti 和 C 含量的增加，合金的显微硬度、强度和抗氧化性都得到了有效改善。在 800 °C 的恒温条件下氧化 100 小时后，与 HEAs 基体相比，碳化铬中铬的优先氧化决定了致密氧化铬层的提前形成，从而使 TC30 合金的抗氧化性达到最佳状态。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Anti-corrosion Methods and Materials 工程技术-冶金工程

CiteScore

2.80

自引率

16.70%

发文量

审稿时长

13.5 months

期刊介绍： Anti-Corrosion Methods and Materials publishes a broad coverage of the materials and techniques employed in corrosion prevention. Coverage is essentially of a practical nature and designed to be of material benefit to those working in the field. Proven applications are covered together with company news and new product information. Anti-Corrosion Methods and Materials now also includes research articles that reflect the most interesting and strategically important research and development activities from around the world. Every year, industry pays a massive and rising cost for its corrosion problems. Research and development into new materials, processes and initiatives to combat this loss is increasing, and new findings are constantly coming to light which can help to beat corrosion problems throughout industry. This journal uniquely focuses on these exciting developments to make essential reading for anyone aiming to regain profits lost through corrosion difficulties. • New methods, materials and software • New developments in research and industry • Stainless steels • Protection of structural steelwork • Industry update, conference news, dates and events • Environmental issues • Health & safety, including EC regulations • Corrosion monitoring and plant health assessment • The latest equipment and processes • Corrosion cost and corrosion risk management.