Temperature-dependent calibration and temperature compensation of elastic shape-memory alloy strain sensors for fiber-reinforced composite applications

Abstract

Strain sensors for fibre-reinforced plastics require higher elasticity and fatigue resistance than conventional strain gauges. Elastic strain sensors made of shape-memory alloys (SMA) meet this requirement. Due to greater elasticity, other procedures are required for their calibration than those recommended in standards. This paper presents a calibration method for shape-memory strain sensors as a function of ambient temperature and methods for temperature compensation are investigated. SMA strain sensors are manufactured as sensor patches from wire and layers of glass fibre fleece infiltrated with epoxy resin. The patches are bonded to bending specimens made of glass-fibre plastic composites. The calibration of the SMA sensors is implemented by means of a 4-point bending test using a self-built test stand. This is designed for operation in a climate chamber. The results show successful proof of feasibility of temperature compensation. The variation of sensor signal in the unloaded state in the temperature response is less than 0.4 mV/V. The gauge factor depends on the temperature and is compensated by means of a regression with temperature sensor data. In combination with a temperature sensor, an almost complete compensation of the temperature-dependent behaviour is possible. A procedure is realised for calibrating SMA sensors at larger strains.