Development of a Digital Twin of the Extruder for Production of Filament from Low Density Polyethylene

IF 0.6 4区工程技术 Q4 ENERGY & FUELS

Chemistry and Technology of Fuels and Oils Pub Date : 2024-03-14 DOI:10.1007/s10553-024-01654-5

I. I. Gumerov, A. K. Ivlev, K. G. Kichatov, T. R. Prosochkina

引用次数: 0

Abstract

On the basis of the characteristics of low-density polyethylene determined experimentally from the geometric dimensions of the extruder parts and COMSOL MULTIPHYSICS software a digital model of the apparatus was created, and the flow rate of the polymer melt from the extruder nozzle was calculated hydrodynamically. The agreement between the experimentally measured polymer flow rate and the value obtained from the model lies within the permissible error. This establishes the adequacy of the digital twin model, which will be used to predict the viscosity characteristics of composite materials based on low-density polyethylene and the technological regimes of their production by blending in the extruder.

Abstract Image

查看原文本刊更多论文

开发用于生产低密度聚乙烯长丝的挤出机数字孪生系统

根据挤压机部件的几何尺寸和 COMSOL MULTIPHYSICS 软件通过实验确定的低密度聚乙烯的特性，创建了设备的数字模型，并通过流体力学计算了聚合物熔体从挤压机喷嘴流出的流速。实验测得的聚合物流速与模型得出的数值之间的一致性在允许误差范围内。这证明了数字孪生模型的适当性，该模型将用于预测以低密度聚乙烯为基础的复合材料的粘度特性及其在挤压机中通过混合生产的技术状态。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Chemistry and Technology of Fuels and Oils 工程技术-工程：化工

CiteScore

0.90

自引率

16.70%

发文量

119

审稿时长

1.0 months

期刊介绍： Chemistry and Technology of Fuels and Oils publishes reports on improvements in the processing of petroleum and natural gas and cracking and refining techniques for the production of high-quality fuels, oils, greases, specialty fluids, additives and synthetics. The journal includes timely articles on the demulsification, desalting, and desulfurizing of crude oil; new flow plans for refineries; platforming, isomerization, catalytic reforming, and alkylation processes for obtaining aromatic hydrocarbons and high-octane gasoline; methods of producing ethylene, acetylene, benzene, acids, alcohols, esters, and other compounds from petroleum, as well as hydrogen from natural gas and liquid products.