Fracture mechanism of carbon fiber-reinforced thermoplastic composite laminates under compression after impact

Abstract

Thermoplastic carbon fiber-reinforced plastics (CFRPs) are increasingly utilized in the aerospace industry owing to their beneficial properties and enhanced formability relative to thermoset CFRPs. Despite the extensive use of these materials, studies focusing on compression after impact (CAI) tests with impact energies exceeding 20 J for thermoplastic CFRPs remain scarce. This study examines CAI tests on quasi-isotropic laminates of thermoplastic CFRP, subjected to a low-velocity impact energy of 27.04 J. For comparison, quasi-isotropic laminates of thermoset CFRP were subjected to a low-velocity impact energy of 36.5 J. These tests reveal that the CAI strength of both materials is comparable, notwithstanding the lower fiber volume fraction in the thermoplastic CFRP. Further, this research incorporates a finite element (FE) analysis to investigate the damage mechanisms in thermoplastic CFRP. The FE model, integrating interlaminar damage observed during the impact tests, accurately predicted the relationship between compressive stress and strain, correlating closely with the experimental outcomes. It was observed that both interlaminar and intralaminar damage propagation were constrained until the point of maximum compressive stress. Prior to reaching this maximum, a region of elevated compressive stress in the fiber direction was noted in the 0° layer near the non-impacted side. These findings indicate that the compressive stress in the fiber direction in the 0° layer adjacent to the non-impacted side is pivotal in dictating the final failure, which determines the CAI strength of thermoplastic CFRP laminates.