Effect of Residual Stress on Hydrogen Embrittlement at Sheared Edge

Abstract

The residual stresses at a circular punched end face in tempered martensitic high-strength steel sheets were investigated using triaxial stress analysis via X-ray diffraction. The maximum principal stress and its direction were calculated from the measured nine stress components. The relationship between the directions of the maximum principal stress and hydrogen cracks was verified by generating hydrogen cracks on the punched end face in the same specimen using cathodic hydrogen charging. The direction of the cracks was perpendicular to that of the maximum principal stress. This result indicates that hydrogen embrittlement at the sheared end face is caused by the maximum principal stress. Moreover, the distribution of the residual stresses toward the thickness direction and the relationship between residual stresses and tensile strength of the specimens were investigated. The maximum principal stress on the punch side was lower than that on the dice side. Unlike the maximum principal stresses, the normal stresses did not increase monotonically with the tensile strength of the specimens. Therefore, it was concluded that investigating the maximum principal stress at any area between the dice side and a line located midway from the end face and dice side is crucial for considering the hydrogen embrittlement criteria.

Fullsize Image