Evaluation of metallurgical risk factors in post-test, advanced 9% Cr creep strength enhanced ferritic (CSEF) steel

IF 1 4区材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY

Materials at High Temperatures Pub Date : 2024-02-26 DOI:10.1080/09603409.2024.2319992

X. Zhang, S. Robertson, S. Hogg, MARK A.E. Jepson

引用次数: 0

Abstract

About 9 wt.% Cr steels are widely used in the design and fabrication of thick section components in combined cycle or coal-fired applications for working temperatures of 600 ~ 650°C. This family of...

查看原文本刊更多论文

高级 9% Cr 蠕变强度强化铁素体钢 (CSEF) 试验后冶金风险因素评估

铬含量约为 9 wt.% 的钢材广泛应用于联合循环或燃煤应用中工作温度为 600 ~ 650°C 的厚截面部件的设计和制造。该系列...

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Materials at High Temperatures 工程技术-材料科学：综合

CiteScore

1.90

自引率

15.40%

发文量

审稿时长

>12 weeks

期刊介绍： Materials at High Temperatures welcomes contributions relating to high temperature applications in the energy generation, aerospace, chemical and process industries. The effects of high temperatures and extreme environments on the corrosion and oxidation, fatigue, creep, strength and wear of metallic alloys, ceramics, intermetallics, and refractory and composite materials relative to these industries are covered. Papers on the modelling of behaviour and life prediction are also welcome, provided these are validated by experimental data and explicitly linked to actual or potential applications. Contributions addressing the needs of designers and engineers (e.g. standards and codes of practice) relative to the areas of interest of this journal also fall within the scope. The term ''high temperatures'' refers to the subsequent temperatures of application and not, for example, to those of processing itself. Materials at High Temperatures publishes regular thematic issues on topics of current interest. Proposals for issues are welcomed; please contact one of the Editors with details.