Behavior of steel beam section under warping using BIM program

Q3 Engineering

Pollack Periodica Pub Date : 2024-02-13 DOI:10.1556/606.2023.00974

Ammar Jalil Al Mosawi

引用次数: 0

Abstract

Warping not only one of the most important phenomena in steel section it is also considered as the most complicated phenomena. Ductility, bearing capacity and serviceability of steel sections may affect by increasing stress concentration of the normal stresses due to warping. In the present work, simulation of steel beam section under effect of warping is studied. Two cantilevers connected to two columns in opposite sides with a middle steel beam-column connection to create different moments on the beam to investigate the behavior of steel section under warping using building information modeling. It is found that the stress strain relationship has four groups depending on the load intensity and the angle of rotation induced due to warping.

查看原文本刊更多论文

使用 BIM 程序分析翘曲下的钢梁截面行为

翘曲不仅是型钢中最重要的现象之一，也被认为是最复杂的现象。由于翘曲导致的法向应力集中增加，可能会影响型钢的延展性、承载能力和适用性。本研究对翘曲影响下的钢梁截面进行了模拟。利用建筑信息模型，将两个悬臂连接到相对两侧的两根柱子上，中间的钢梁-柱连接在梁上产生不同的力矩，以研究钢梁截面在翘曲作用下的行为。研究发现，应力应变关系有四组，取决于荷载强度和翘曲引起的旋转角度。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Pollack Periodica Engineering-Civil and Structural Engineering

CiteScore

1.50

自引率

0.00%

发文量

期刊介绍： Pollack Periodica is an interdisciplinary, peer-reviewed journal that provides an international forum for the presentation, discussion and dissemination of the latest advances and developments in engineering and informatics. Pollack Periodica invites papers reporting new research and applications from a wide range of discipline, including civil, mechanical, electrical, environmental, earthquake, material and information engineering. The journal aims at reaching a wider audience, not only researchers, but also those likely to be most affected by research results, for example designers, fabricators, specialists, developers, computer scientists managers in academic, governmental and industrial communities.