A correlation study on piezo-embedded carbon fibre reinforced polylactic acid composite: Experimental and numerical modelling

Abstract

In this research work, a piezoelectric sensor and actuator model was designed. Carbon fibre-reinforced polylactic acid (CF/PLA) composites were fabricated using the fused deposition modelling (FDM) technique using many parameters to achieve this goal. For instance, the primary key parameters were 0.1 mm (layer height) and 25 mm/s (print head). Besides, the fabricated samples were subjected to a tensile study. Besides, MATLAB® Partial Differential Equation (PDE) tool was used to develop a finite element analysis (FEA) model for the piezoelectric actuator using the experimentally tested results. The MATLAB® was also used to examine the geometry and tip deflection. The experimental works were carried out to measure the sample’s strain using piezoelectric sensors. This approach could be used to establish the accuracy of the model. The CF/PLA composites were fabricated using 20 wt.% of reinforcements. The experimental results and finite element simulation were good agreement on results. Results reported that the deflections of 6.5765 mm, 5.197 mm, and 7.6328 mm, respectively embedded with PZT 5J, PZT 5H, and PZT 5A.