A parametric and comparative study on bare-tube banks and new-cam-shaped tube banks for waste heat recovery applications

Abstract

The present study numerically examines the effects of tube diameter (12 to 35 mm), arrangement, pitch-to-diameter ratio (1.25 to 2.5), length (300 to 1500 mm), and passage number (1-4 passes) on the thermofluidic characteristics of cross-flow tube bundles. Especially, five new cam-shaped tubes are proposed in comparison with the conventional round tube. The air temperatures at the cold and hot side inlets are kept constant at 25 °C and 600 °C, respectively. The numerical method is verified by the existing experimental results. The findings show that a cam-shaped tube with an equal diameter (Cam_1818) is a promising tube for tube bundles, which apply in waste heat recovery. Indeed, it can offer the same minimum gap as that of the round tube; however, it improves the total thermal resistance up to about 28% and enhances the heat transfer rate up to an average of 42.3% compared to that of the round tubes at the same pumping power.