THE COMBINED EFFECT OF SINTERING ADDITIVES MgO AND TEOS ON THE STRUCTURE AND OPTICAL PROPERTIES OF CERAMICS YAG:Yb, Er

D. Vakalov, I. S. Chikulina, S. N. Skichuk, D. P. Bedrakov, F. Malyavin, L. V. Kozitov
{"title":"THE COMBINED EFFECT OF SINTERING ADDITIVES MgO AND TEOS ON THE STRUCTURE AND OPTICAL PROPERTIES OF CERAMICS YAG:Yb, Er","authors":"D. Vakalov, I. S. Chikulina, S. N. Skichuk, D. P. Bedrakov, F. Malyavin, L. V. Kozitov","doi":"10.14489/glc.2023.10.pp.026-038","DOIUrl":null,"url":null,"abstract":"In this work, the effect of sintering additives based on magnesium oxide (MgO) and silicon oxide (TEOS) in concentrations from 0.02 to 0.10 wt. % and 0.2 to 0.5 wt. %, respectively, was investigated on the microstructure and optical properties of ceramics of the composition Y2,82Yb0,15Er0,03Al5O12, made from powders synthesized by chemical co-deposition. The results presented in the paper showed that the introduction of a sintering additive based on MgO into a ceramic powder does not affect its phase composition, structural and morphological characteristics. It is shown that for ceramics of the composition Y2,82Yb0,15Er0,03Al5O12, the best value of the optical transmission coefficient was achieved at a vacuum sintering temperature of 1800 °C and a concentration of sintering additives of 0.06 wt. % MgO and 0.3 wt. % TEOS. It is shown that the sintering mechanism of ceramics Y2,82Yb0,15Er0,03Al5O12 depends on the ratio of sintering additives MgO and TEOS.","PeriodicalId":445802,"journal":{"name":"Steklo i Keramika","volume":"37 2 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Steklo i Keramika","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.14489/glc.2023.10.pp.026-038","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

In this work, the effect of sintering additives based on magnesium oxide (MgO) and silicon oxide (TEOS) in concentrations from 0.02 to 0.10 wt. % and 0.2 to 0.5 wt. %, respectively, was investigated on the microstructure and optical properties of ceramics of the composition Y2,82Yb0,15Er0,03Al5O12, made from powders synthesized by chemical co-deposition. The results presented in the paper showed that the introduction of a sintering additive based on MgO into a ceramic powder does not affect its phase composition, structural and morphological characteristics. It is shown that for ceramics of the composition Y2,82Yb0,15Er0,03Al5O12, the best value of the optical transmission coefficient was achieved at a vacuum sintering temperature of 1800 °C and a concentration of sintering additives of 0.06 wt. % MgO and 0.3 wt. % TEOS. It is shown that the sintering mechanism of ceramics Y2,82Yb0,15Er0,03Al5O12 depends on the ratio of sintering additives MgO and TEOS.
氧化镁和 TEOS 掺杂剂对 YAG:Yb,Er 陶瓷结构和光学特性的综合影响
在这项工作中,研究了基于氧化镁(MgO)和氧化硅(TEOS)的烧结添加剂(浓度分别为 0.02 至 0.10 wt. % 和 0.2 至 0.5 wt. %)对由化学共沉积法合成的 Y2,82Yb0,15Er0,03Al5O12 陶瓷粉末的微观结构和光学特性的影响。论文的研究结果表明,在陶瓷粉末中加入基于氧化镁的烧结添加剂不会影响其相组成、结构和形态特征。结果表明,对于成分为 Y2,82Yb0,15Er0,03Al5O12 的陶瓷,在真空烧结温度为 1800 ℃、烧结添加剂浓度为 0.06 wt. % MgO 和 0.3 wt. % TEOS 时,光传输系数达到了最佳值。研究表明,Y2,82Yb0,15Er0,03Al5O12 陶瓷的烧结机理取决于烧结添加剂氧化镁和 TEOS 的比例。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信