Experimental study of dosimetric properties of thermoluminescent powder TLD-100

Abstract

The creation of a scientifically substantiated quality assurance system for dosimetry and the optimization of medical exposure of the population of Ukraine during diagnostic and therapeutic procedures (and the possibility of dosimetric control and monitoring of emergency situations) falls within the field of the application of ionizing radiation sources (IRs). Trends in modern medicine in most countries, including Ukraine, prove a continued increase in the share of medical exposure. The main requirements and recommendations for the use of IRs for medical purposes while ensuring the radiation safety requirements for patients are provided in the documents of such International Organizations as the International Commission on Radiological Protection (ICRP), the International Atomic Energy Agency (IAEA), the World Health Organization (WHO) and the European Commission (EC). One of the key factors to ensure the quality of radiation therapy is metrological and dosimetric support. To enhance the effectiveness of radiation treatment and reduce the number of complications in the future, it is necessary to irradiate the local target within the patient’s body with a dose error of no more than 5%. Control of the radiation output of the therapeutic device, i.e., the calibration of the therapeutic beam used in the treatment process, is an essential element of radiation therapy. Radiation protection programmes are based on checking the accuracy of the calibration of remote radiotherapy devices using thermoluminescent dosimeters (TLDs) – small plastic capsules filled with thermoluminescent powder that are sent by post to radiology centres for exposure to a specific dose in a water phantom. Radiation therapy in Ukraine is primarily conducted using cobalt machines, X-ray therapy devices and linear accelerators. The results of the study include the examination of the dependency of measurement results on various exposure parameters using the automatic reader PCL-3, the determination of dosimetric characteristics of the thermoluminescent powder TLD-100, and the development of a calibration method for thermoluminescent dosimeters under standard irradiation conditions on a remote gamma therapy device. Therefore, the accuracy of beam calibration using TLD dosimeters has been studied, which will enable to timely detect errors in clinical dosimetry and reduce the number of cases of radiation-related complications for patients during their treatment.