Location Aware Beamforming in Millimeter-Wave Band Ultra-Dense Radio Access Networks. Part 2. Model of a Set of Radio Links

G. Fokin
{"title":"Location Aware Beamforming in Millimeter-Wave Band Ultra-Dense Radio Access Networks. Part 2. Model of a Set of Radio Links","authors":"G. Fokin","doi":"10.31854/1813-324x-2023-9-5-43-64","DOIUrl":null,"url":null,"abstract":"The second part of the study of beamforming issues, based on positioning in ultra-dense millimeter wave radio access networks, is devoted to the formalization and software implementation of a complex simulation model of the functioning of a set of directional radio links. Each directional radio link between a base station (gNodeB – gNB), equipped with an antenna array, and a user equipment (UE), operating in omnidirectional mode, is formed according to the location of the UE, known at the gNB. The set of gNB→UE directional radio links, simultaneously operating in a common frequency range, is studied as a set of traffic beams, that implement space division multiple access (SDMA). Spatial multiplexing is implemented through three-dimensional beamforming at the gNB and makes it possible to compensate for propagation losses and high levels of interference. In the first part of the study, it was shown that the problem of practical implementation of SDMA in ultra-dense radio access networks is a significant (tens of dB) spread in the signal to interference plus noise ratio (SINR), depending on the arrangement of two devices. The purpose of this study is to establish the dependence of SINR on 1) the beamwidth of the gNB sector in the direction of the user equipment in the radio link of the signal of interest (SOI); 2) uncertainty of the UE location; 3) interference from radio links of signal not of interest (SNOI): a) within its sector, b) other sectors of its cell and c) other cells in the network. The simulation model developed and implemented in software in this work for the first time made it possible to establish the interdependence of the UE positioning error factors and the required width of the traffic beam for its service. In particular, it was found, that as the positioning error decreases from 10 to 1 m, the required beam width in the horizontal and vertical planes narrows to 3 °, which makes it possible to increase the SINR to 25 dB. A simultaneous transmission multiplexing study showed that for 64 spatially multiplexed UEs, as the cell size increases from 20 to 300 m, the SINR increases by approximately 30 dB, subject to a beamwidth constraint of 3°. Unlike similar studies, in this model, the contribution from interference from simultaneously operating traffic beams within its sector, other sectors of its cell and other cells in the network is shown separately for the first time, which allows to differentiate the origin of interference and use scientifically based beamwidth control for their compensation.","PeriodicalId":298883,"journal":{"name":"Proceedings of Telecommunication Universities","volume":"29 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-11-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of Telecommunication Universities","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31854/1813-324x-2023-9-5-43-64","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

The second part of the study of beamforming issues, based on positioning in ultra-dense millimeter wave radio access networks, is devoted to the formalization and software implementation of a complex simulation model of the functioning of a set of directional radio links. Each directional radio link between a base station (gNodeB – gNB), equipped with an antenna array, and a user equipment (UE), operating in omnidirectional mode, is formed according to the location of the UE, known at the gNB. The set of gNB→UE directional radio links, simultaneously operating in a common frequency range, is studied as a set of traffic beams, that implement space division multiple access (SDMA). Spatial multiplexing is implemented through three-dimensional beamforming at the gNB and makes it possible to compensate for propagation losses and high levels of interference. In the first part of the study, it was shown that the problem of practical implementation of SDMA in ultra-dense radio access networks is a significant (tens of dB) spread in the signal to interference plus noise ratio (SINR), depending on the arrangement of two devices. The purpose of this study is to establish the dependence of SINR on 1) the beamwidth of the gNB sector in the direction of the user equipment in the radio link of the signal of interest (SOI); 2) uncertainty of the UE location; 3) interference from radio links of signal not of interest (SNOI): a) within its sector, b) other sectors of its cell and c) other cells in the network. The simulation model developed and implemented in software in this work for the first time made it possible to establish the interdependence of the UE positioning error factors and the required width of the traffic beam for its service. In particular, it was found, that as the positioning error decreases from 10 to 1 m, the required beam width in the horizontal and vertical planes narrows to 3 °, which makes it possible to increase the SINR to 25 dB. A simultaneous transmission multiplexing study showed that for 64 spatially multiplexed UEs, as the cell size increases from 20 to 300 m, the SINR increases by approximately 30 dB, subject to a beamwidth constraint of 3°. Unlike similar studies, in this model, the contribution from interference from simultaneously operating traffic beams within its sector, other sectors of its cell and other cells in the network is shown separately for the first time, which allows to differentiate the origin of interference and use scientifically based beamwidth control for their compensation.
毫米波频段超密集无线接入网络中的位置感知波束成形。第 2 部分:一组无线电链路的模型一组无线电链路的模型
波束成形问题研究的第二部分基于超密集毫米波无线接入网络中的定位,专门研究一组定向无线电链路功能的复杂仿真模型的形式化和软件实施。配备天线阵列的基站(gNodeB - gNB)与全向模式运行的用户设备(UE)之间的每个定向无线电链路都是根据 gNB 所知的 UE 位置形成的。gNB→UE 定向无线电链路的集合同时在一个共同的频率范围内运行,被研究为一组流量波束,实现空分多址接入(SDMA)。空间多路复用是通过 gNB 的三维波束成形实现的,因此可以补偿传播损耗和高水平干扰。研究的第一部分表明,在超密集无线电接入网络中实际应用 SDMA 的问题是,信号与干扰加噪声比(SINR)会有明显(数十 dB)的差异,这取决于两个设备的排列方式。本研究的目的是确定 SINR 与以下因素的关系:1)相关信号 (SOI) 无线链路中用户设备方向的 gNB 扇区波束宽度;2)UE 位置的不确定性;3)来自非相关信号 (SNOI) 无线链路的干扰:a)其扇区内;b)其小区的其他扇区;c)网络中的其他小区。在这项工作中开发并在软件中实施的仿真模型首次能够确定 UE 定位误差因素与其服务所需的流量波束宽度之间的相互依存关系。特别是,研究发现,当定位误差从 10 米减小到 1 米时,水平和垂直面上所需的波束宽度就会缩小到 3 °,从而有可能将 SINR 提高到 25 dB。一项同步传输多路复用研究表明,对于 64 个空间多路复用的 UE,随着小区大小从 20 米增加到 300 米,在波束宽度为 3° 的限制条件下,SINR 可增加约 30 dB。与类似研究不同的是,在该模型中,首次分别显示了在其扇区内同时运行的交通波束、其小区的其他扇区以及网络中的其他小区所产生的干扰,从而可以区分干扰的来源,并使用科学的波束宽度控制进行补偿。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信