Guiding as a General Consequence of the Charged Particle Interaction with the Inner Surface of an Insulator Capillary—Guiding of 1 MeV Proton Microbeam through Polytetrafluoroethylene Macrocapillary

Abstract

The transmission of energetic, 1 MeV proton microbeam through a single, cylindrical shaped, macrometer-sized polytetrafluoroethylene capillary was studied experimentally. The capillary axis was tilted with respect to the axis of the incident ion beam. The tilting, the aspect ratio of the capillary and the small beam divergence disabled the geometrical transmission of the beam through the target. The intensity, energy, deflection and charge state of the transmitted beam were investigated. We found that the pure guided transmission of a MeV/amu energy ion beam is observable. We clearly identified three completely different stages during the guiding process according to the measured energy distribution of transmitted particles. At the beginning the transmission intensity was low and only inelastic contributions with energy lower than 1 MeV were found in the spectrum. Later, in the second stage, the elastic peak appeared and became more and more significant. Finally, when the stable transmission evolved, only the elastic peak was present and the inelastic area was totally absent as a direct consequence of the ion guiding and as a result of the charged particle interaction with a charged inner surface of the insulator capillary.