Investigating potential application of bio-based polymeric surfactant using methyl ester from palm oil for chemical enhanced oil recovery (CEOR)

Q3 Engineering
Agam Duma, Kalista Wibowo, Rizki Megawati, Vilia Kartika Setyaningrum, Erika Wahyu Putri, A. S. Handayani, M. D. Solikhah, Achmad Chafidz
{"title":"Investigating potential application of bio-based polymeric surfactant using methyl ester from palm oil for chemical enhanced oil recovery (CEOR)","authors":"Agam Duma, Kalista Wibowo, Rizki Megawati, Vilia Kartika Setyaningrum, Erika Wahyu Putri, A. S. Handayani, M. D. Solikhah, Achmad Chafidz","doi":"10.21924/cst.8.2.2023.1318","DOIUrl":null,"url":null,"abstract":"Fatty Acid Methyl Ester (FAME) or palm oil methyl ester is one of the palm oil derivatives in which one of the anionic surfactants that can be generated from it is methyl ester sulfonate (MES). This bio-based surfactant can reduce the interfacial tension (IFT) between oil and water. To produce a bio-based polymeric surfactant, sulfonate groups from MES were grafted onto polymer chains. Palm oil methyl ester was reacted with sulfuric acid (H2SO4) to synthesize MES. Afterwards, MES was reacted with the Ethyl Acrylate (EA) monomer to synthesize polymeric surfactant. Investigating this route to produce a bio-based polymeric surfactant has become the novelty of this study. This study showed that the best polymerization result was obtained at a mole ratio of MES to EA (1:0.5) with the highest viscosity of 14.47 mm2/s. The critical micelle concentration (CMC) analysis showed 0.5% at a mole ratio of MES to EA (1:0.5) which corresponded to the lowest interfacial tension (IFT) of 1.95 x 10-3 mN/m. Meanwhile, the contact angle gradually decreased from 58.44 to 11.79°. The polymeric surfactant, furthermore, was analyzed using FTIR and H-NMR and successfully confirmed the formation of bio-based polymeric surfactant. The core flooding experiment found that approximately 16.57% of oil could be recovered. The results of the study revealed a good potential of the polymeric surfactant to be applied in chemical enhanced oil recovery (CEOR).","PeriodicalId":36437,"journal":{"name":"Communications in Science and Technology","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2023-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Communications in Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21924/cst.8.2.2023.1318","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

Abstract

Fatty Acid Methyl Ester (FAME) or palm oil methyl ester is one of the palm oil derivatives in which one of the anionic surfactants that can be generated from it is methyl ester sulfonate (MES). This bio-based surfactant can reduce the interfacial tension (IFT) between oil and water. To produce a bio-based polymeric surfactant, sulfonate groups from MES were grafted onto polymer chains. Palm oil methyl ester was reacted with sulfuric acid (H2SO4) to synthesize MES. Afterwards, MES was reacted with the Ethyl Acrylate (EA) monomer to synthesize polymeric surfactant. Investigating this route to produce a bio-based polymeric surfactant has become the novelty of this study. This study showed that the best polymerization result was obtained at a mole ratio of MES to EA (1:0.5) with the highest viscosity of 14.47 mm2/s. The critical micelle concentration (CMC) analysis showed 0.5% at a mole ratio of MES to EA (1:0.5) which corresponded to the lowest interfacial tension (IFT) of 1.95 x 10-3 mN/m. Meanwhile, the contact angle gradually decreased from 58.44 to 11.79°. The polymeric surfactant, furthermore, was analyzed using FTIR and H-NMR and successfully confirmed the formation of bio-based polymeric surfactant. The core flooding experiment found that approximately 16.57% of oil could be recovered. The results of the study revealed a good potential of the polymeric surfactant to be applied in chemical enhanced oil recovery (CEOR).
利用棕榈油甲酯研究生物基聚合物表面活性剂在化学强化采油(CEOR)中的潜在应用
脂肪酸甲酯(FAME)或棕榈油甲酯是棕榈油衍生物之一,其中可生成的阴离子表面活性剂之一是甲酯磺酸盐(MES)。这种生物基表面活性剂可以降低油和水之间的界面张力(IFT)。为了生产生物基聚合物表面活性剂,将 MES 中的磺酸基接枝到聚合物链上。棕榈油甲酯与硫酸(H2SO4)反应合成 MES。然后,MES 与丙烯酸乙酯(EA)单体反应,合成聚合物表面活性剂。研究用这种方法生产生物基聚合物表面活性剂是本研究的新颖之处。研究表明,MES 与 EA 的摩尔比为 1:0.5 时聚合效果最好,粘度最高,为 14.47 mm2/s。临界胶束浓度(CMC)分析表明,当 MES 与 EA 的摩尔比为 1:0.5 时,临界胶束浓度为 0.5%,对应的最低界面张力(IFT)为 1.95 x 10-3 mN/m。同时,接触角从 58.44°逐渐下降到 11.79°。此外,还利用傅立叶变换红外光谱和 H-NMR 对聚合物表面活性剂进行了分析,成功证实了生物基聚合物表面活性剂的形成。岩心淹没实验发现,大约有 16.57% 的石油可以被回收。研究结果揭示了该聚合物表面活性剂在化学强化采油(CEOR)中的良好应用潜力。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Communications in Science and Technology
Communications in Science and Technology Engineering-Engineering (all)
CiteScore
3.20
自引率
0.00%
发文量
13
审稿时长
24 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信