Tensile efficiency and fatigue life of similar and dissimilar carbon steel joints subjected to rotary friction welding

Abstract

Rotary friction welding (RFW) is a solid-state welding method that can address the melting point limitation of other welding types; however, the welded area remains at risk of failure due to fatigue during operation. Fatigue failure is difficult to detect and predict, making it a critical failure mode in engineering. Although many fatigue life prediction methods are available, they do not consider the impact of RFW parameters (such as pressure, speed, and friction time) on fatigue strength. Owing to their good mechanical properties and commercial viability, carbon steel of grades C35 and C45 is commonly applied to manufacture main parts in the automotive industry. This study centers on employing RFW to join C35 and C45, representing the first-ever instance of using this technique to weld them together. The primary goal of RFW for C35 and C45 is to construct optimum parts that meet specific design requirements and have a long fatigue life. Findings showed C45–C45 joints (77 %) were more tensile-efficient than C35–C35 joints (73 %). Dissimilar C35–C45 joints reached 60 % of C45 base metal and 76 % of C35 base metal in terms of tensile efficiency. RFW welds had lower tensile strength than their base metals. Optimal results came at 35 MPa friction pressure and 8–12 s friction time for both similar and dissimilar RFW joints using the Coffin–Manson method, dissimilar C33–C45 joint fatigue life improved by over 85 %, aligning C35 and C45 engineering aspects. SEM microstructure analysis showed two regions: non-deformed (NDZ) and plastically deformed (PDZ), with broader PDZ indicating better tensile strength. These findings enhance RFW's efficiency, promoting automotive part longevity and safety.