Analysis and Suppression of Thrust Fluctuations in Halbach-type Permanent Magnet Synchronous Linear Motors

Abstract

Abstract To address the thrust fluctuation problem of a bilateral type permanent magnet synchronous linear motor (DSPMSLM) with a Halbach permanent magnet array, a DSPMLSM with Halbach permanent magnet array structure is designed using ANSYS software. And based on this motor, the thrust fluctuations of the DSPMLSM are suppressed by using methods such as changing the end tooth height of the armature core, the tooth slot structure, and the opening of an auxiliary slot in the primary yoke. Firstly, the causes of thrust fluctuations in these areas were analyzed. Secondly, MAXWELL simulations were used to demonstrate that the selection of a suitable end tooth height could suppress end forces and that the use of a suitable-sized half-open slot and an auxiliary slot in the primary yoke could effectively reduce slot forces. All three methods can be used to suppress motor thrust fluctuations, reducing the thrust fluctuations of the DSPMLSM from 11.4% to 3.28% and increasing the average output thrust, which provides a reference for further optimization of the output performance of the linear motor.