WO3/Bi2WO6 photoanode enhancement for photoelectrocatalytic water oxidation; scan rate effect optimization in the cyclic voltammetry deposition method

Titsucha Uttayanil, Chatchai Ponchio
{"title":"WO3/Bi2WO6 photoanode enhancement for photoelectrocatalytic water oxidation; scan rate effect optimization in the cyclic voltammetry deposition method","authors":"Titsucha Uttayanil, Chatchai Ponchio","doi":"10.60101/jarst.2023.253891","DOIUrl":null,"url":null,"abstract":"The photoelectrocatalytic approach is a very efficient technology for eliminating microorganisms and organic contaminants. The development of photoanode is widely recognized as a crucial approach to enhancing the efficiency of photoelectrocatalytic cells. The key goal of this methodology is to enhance the efficacy of photoelectrocatalytic oxidation by optimizing composited photoanode fabrication. This research development focuses mainly on fabricating composite WO3/Bi2WO6 semiconductor thin films with high water oxidation efficiency and favorable photoelectrocatalytic E. coli degradation applications. Cyclic voltammetry was utilized to create WO3/Bi2WO6 thin coatings on conducting glass while optimizing the photoelectrocatalytic activity via the scan rate parameter. The characteristics of the developed electrode, including charge transfer resistance, optical properties, morphology, crystal structure, chemical composition, and oxidation numbers, were investigated to improve photoelectrocatalytic activity. It was observed that the scanning rate significantly influenced the characteristics of the WO3/Bi2WO6 electrode and the photoelectrocatalytic activity on water oxidation. It was discovered that the WO3/Bi2WO6 electrode prepared with a scan rate of 25 mV/s exhibited the greatest photoelectrocatalytic water oxidation as well as distinguishing characteristics from other conditions. The decision to utilize decreased scanning rates has been determined to optimize the reaction kinetics and improve the film-forming properties of WO3/Bi2WO6. Significantly, the developed electrode can also be used to eliminate 87.5% of E.coli in 15 minutes via a photoelectrocatalytic catalytic mechanism. The photoanode composed of WO3/Bi2WO6 has promising capabilities in removing microorganisms and organic pollutants, making it a viable candidate for future advancements in wastewater management applications.","PeriodicalId":479861,"journal":{"name":"Journal of Applied Research on Science and Technology (JARST)","volume":"68 4","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-10-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Applied Research on Science and Technology (JARST)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.60101/jarst.2023.253891","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

The photoelectrocatalytic approach is a very efficient technology for eliminating microorganisms and organic contaminants. The development of photoanode is widely recognized as a crucial approach to enhancing the efficiency of photoelectrocatalytic cells. The key goal of this methodology is to enhance the efficacy of photoelectrocatalytic oxidation by optimizing composited photoanode fabrication. This research development focuses mainly on fabricating composite WO3/Bi2WO6 semiconductor thin films with high water oxidation efficiency and favorable photoelectrocatalytic E. coli degradation applications. Cyclic voltammetry was utilized to create WO3/Bi2WO6 thin coatings on conducting glass while optimizing the photoelectrocatalytic activity via the scan rate parameter. The characteristics of the developed electrode, including charge transfer resistance, optical properties, morphology, crystal structure, chemical composition, and oxidation numbers, were investigated to improve photoelectrocatalytic activity. It was observed that the scanning rate significantly influenced the characteristics of the WO3/Bi2WO6 electrode and the photoelectrocatalytic activity on water oxidation. It was discovered that the WO3/Bi2WO6 electrode prepared with a scan rate of 25 mV/s exhibited the greatest photoelectrocatalytic water oxidation as well as distinguishing characteristics from other conditions. The decision to utilize decreased scanning rates has been determined to optimize the reaction kinetics and improve the film-forming properties of WO3/Bi2WO6. Significantly, the developed electrode can also be used to eliminate 87.5% of E.coli in 15 minutes via a photoelectrocatalytic catalytic mechanism. The photoanode composed of WO3/Bi2WO6 has promising capabilities in removing microorganisms and organic pollutants, making it a viable candidate for future advancements in wastewater management applications.
WO3/Bi2WO6光阳极增强用于光电催化水氧化循环伏安法沉积法扫描速率效应优化
光电催化法是一种非常有效的去除微生物和有机污染物的技术。发展光阳极是提高光电催化电池效率的重要途径。该方法的关键目标是通过优化复合光阳极的制造来提高光电催化氧化的效率。本研究的重点是制备具有高水氧化效率和良好的光电催化大肠杆菌降解应用的WO3/Bi2WO6复合半导体薄膜。利用循环伏安法在导电玻璃上制备WO3/Bi2WO6薄膜,并通过扫描速率参数优化其光电催化活性。研究了电极的电荷转移电阻、光学性能、形貌、晶体结构、化学成分和氧化值等特性,以提高电极的光电催化活性。观察到扫描速率显著影响WO3/Bi2WO6电极的特性和对水氧化的光电催化活性。结果表明,扫描速率为25 mV/s时制备的WO3/Bi2WO6电极具有较好的光电催化水氧化性能,且具有与其他条件不同的特点。为了优化反应动力学,提高WO3/Bi2WO6的成膜性能,决定降低扫描速率。值得注意的是,所开发的电极还可以通过光电催化机制在15分钟内去除87.5%的大肠杆菌。由WO3/Bi2WO6组成的光阳极在去除微生物和有机污染物方面具有良好的能力,使其成为未来废水管理应用的可行候选材料。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信