Testing of Regulating and Non-Regulating Hydraulic Pumps

IF 1.3 Q2 AGRICULTURE, MULTIDISCIPLINARY

Acta Technologica Agriculturae Pub Date : 2023-11-14 DOI:10.2478/ata-2023-0031

Ján Kosiba, Gabriela Čurgaliová, Zdenko Tkáč, Juraj Jablonický, Liudmyla Hanushchak-Yefimenko, Tetiana Bukoros

引用次数: 0

Abstract

Abstract This article deals with the testing of regulating and non-regulating hydraulic pumps in laboratory conditions. The laboratory test was carried out on the hydraulic device consisting of two separate hydraulic circuits (for testing the non-regulating hydraulic pump and regulating hydraulic pump). A throttle valve or proportional throttle valve is used for loading. During the laboratory tests, the flow efficiency of the non-regulating hydraulic pump at rotation speed n = 1,500 rpm (nominal speed) was η pp = 98.91% (0 MPa) and η pp = 94.97% (20 MPa), and for the regulating hydraulic pump, the values were η pp = 97.57% (0 MPa) and η pp = 94.54% (20 MPa). The determined values of flow efficiency of hydraulic pumps determine the correct operation of the experimental hydraulic laboratory equipment.

查看原文本刊更多论文

调节和非调节液压泵的试验

摘要本文介绍了调节和非调节液压泵在实验室条件下的试验。对由两个独立液压回路组成的液压装置(用于测试非调节液压泵和调节液压泵)进行了实验室试验。使用节流阀或比例节流阀进行加载。在室内试验中，转速n = 1,500 rpm(公称转速)时，非调节液压泵的流量效率η pp = 98.91% (0 MPa)和η pp = 94.97% (20 MPa)，调节液压泵的流量效率η pp = 97.57% (0 MPa)和η pp = 94.54% (20 MPa)。液压泵流量效率的测定值决定了实验液压实验室设备的正确运行。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Acta Technologica Agriculturae AGRICULTURE, MULTIDISCIPLINARY-

CiteScore

2.50

自引率

28.60%

发文量

审稿时长

18 weeks

期刊介绍： Acta Technologica Agriculturae is an international scientific double-blind peer reviewed journal focused on agricultural engineering. The journal is multidisciplinary and publishes original research and review papers in engineering, agricultural and biological sciences, and materials science. Aims and Scope Areas of interest include but are not limited to: agricultural and biosystems engineering; machines and mechanization of agricultural production; information and electrical technologies; agro-product and food processing engineering; physical, chemical and biological changes in the soil caused by tillage and field traffic, soil working machinery and terramechanics; renewable energy sources and bioenergy; rural buildings; related issues from applied physics and chemistry, ecology, economy and energy.