Application of hot isostatic pressing (HIP) technology to diffusion bond refractory metals for proton beam targets and absorbers at CERN

Material Design & Processing Communications Pub Date : 2020-08-03 DOI:10.1002/mdp2.193

Josep Busom Descarrega, Marco Calviani, Thomas Hutsch, Edmundo López Sola, Ana Teresa Pérez Fontenla, Antonio Perillo Marcone, Stefano Sgobba, Thomas Weißgärber

{"title":"Application of hot isostatic pressing (HIP) technology to diffusion bond refractory metals for proton beam targets and absorbers at CERN","authors":"Josep Busom Descarrega, Marco Calviani, Thomas Hutsch, Edmundo López Sola, Ana Teresa Pérez Fontenla, Antonio Perillo Marcone, Stefano Sgobba, Thomas Weißgärber","doi":"10.1002/mdp2.193","DOIUrl":null,"url":null,"abstract":"First published: 08 August 2019 https://doi.org/10.1002/mdp2.101The authors would like to draw attention to the following error:In Section 2.1: Prototypes configuration and materials, the thickness of the foils was incorrectly stated as 50 mm. The correct value is 50 μm.The paragraph should appear as follows:‘Two types of prototypes were built, either with a single or double target material cylinders. The single-cylinder prototypes were produced to study the target to cladding materials bonding whilst the double-cylinder prototypes were produced to study the target to target materials bonding. Ta foils were eventually introduced between the materials as diffusion interfacial aids. The foils’ thickness was fixed in 50 μm, following literature recommendations, to maximize the bonding strength.14, 18 The two types of prototypes are represented in Figure 2 with their respective components'.The authors apologise for any misunderstanding arising from this error.","PeriodicalId":100886,"journal":{"name":"Material Design & Processing Communications","volume":"2 4","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2020-08-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1002/mdp2.193","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Material Design & Processing Communications","FirstCategoryId":"1085","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1002/mdp2.193","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

Abstract

First published: 08 August 2019 https://doi.org/10.1002/mdp2.101

The authors would like to draw attention to the following error:

In Section 2.1: Prototypes configuration and materials, the thickness of the foils was incorrectly stated as 50 mm. The correct value is 50 μm.

The paragraph should appear as follows:

‘Two types of prototypes were built, either with a single or double target material cylinders. The single-cylinder prototypes were produced to study the target to cladding materials bonding whilst the double-cylinder prototypes were produced to study the target to target materials bonding. Ta foils were eventually introduced between the materials as diffusion interfacial aids. The foils’ thickness was fixed in 50 μm, following literature recommendations, to maximize the bonding strength.14, 18 The two types of prototypes are represented in Figure 2 with their respective components'.

The authors apologise for any misunderstanding arising from this error.

查看原文本刊更多论文

热等静压(HIP)技术在欧洲核子研究中心质子束靶和吸收器扩散键难熔金属中的应用

首次发布时间:2019年8月8日https://doi.org/10.1002/mdp2.101The作者想提请注意以下错误:在第2.1节:原型配置和材料中，箔的厚度错误地表述为50毫米。正确值为50 μm。该段应如下所示:“建造了两种原型，一种是单目标材料圆柱体，另一种是双目标材料圆柱体。制作了单缸原型来研究靶与包层材料的粘接，制作了双缸原型来研究靶与靶材料的粘接。钽箔最终被引入材料之间作为扩散界面的辅助剂。根据文献建议，将箔的厚度固定在50 μm，以最大限度地提高结合强度。这两种类型的原型用它们各自的组件在图2中表示出来。作者对这一错误引起的任何误解表示歉意。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Material Design & Processing Communications

CiteScore

5.30

自引率

0.00%

发文量