{"title":"A novel measurement method for measuring the concentration-dependent mutual diffusion coefficients based on finite volume method","authors":"Yuqi Su, Weijie Jia, Junshuai Chen, Songtao Cao, Maogang He, Ying Zhang","doi":"10.1016/j.jct.2023.107208","DOIUrl":null,"url":null,"abstract":"<div><p>This paper presents a novel measurement method based on the finite volume method (FVM), which can be used for measuring the concentration-dependent mutual diffusion coefficient <em>D</em>(<em>C</em>) in binary solution. The measurement principle of <em>D</em> was derived by integrating the Fick’s second law in the control volume and establishing discretization equation. By simulating the diffusion process of binary solution, discussed the feasibility of this method. This new method can be used by an experimental system that can monitor changes in concentration distribution, such as optical interferometry. A set of 20 binary mixtures was tested to verify the method. The experimental results showed good agreement with and the literature, which verifies the accuracy of the method. The relative expanded combined uncertainty for the proposed method is estimated to 2.2 %. In addition, <em>D</em>(<em>C</em>) of LiTSFI aqueous solution was measured by the new method based on the digital holographic interferometry system at 288.15 K, 298.15 K and 308.15 K over the mass fraction range of 0 ∼ 0.447 (0 ∼ 2 mol/L). The temperature and concentration influences of <em>D</em> were discussed and a semi-empirical correlation was built.</p></div>","PeriodicalId":54867,"journal":{"name":"Journal of Chemical Thermodynamics","volume":null,"pages":null},"PeriodicalIF":2.2000,"publicationDate":"2023-11-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Chemical Thermodynamics","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0021961423002057","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0
Abstract
This paper presents a novel measurement method based on the finite volume method (FVM), which can be used for measuring the concentration-dependent mutual diffusion coefficient D(C) in binary solution. The measurement principle of D was derived by integrating the Fick’s second law in the control volume and establishing discretization equation. By simulating the diffusion process of binary solution, discussed the feasibility of this method. This new method can be used by an experimental system that can monitor changes in concentration distribution, such as optical interferometry. A set of 20 binary mixtures was tested to verify the method. The experimental results showed good agreement with and the literature, which verifies the accuracy of the method. The relative expanded combined uncertainty for the proposed method is estimated to 2.2 %. In addition, D(C) of LiTSFI aqueous solution was measured by the new method based on the digital holographic interferometry system at 288.15 K, 298.15 K and 308.15 K over the mass fraction range of 0 ∼ 0.447 (0 ∼ 2 mol/L). The temperature and concentration influences of D were discussed and a semi-empirical correlation was built.
期刊介绍:
The Journal of Chemical Thermodynamics exists primarily for dissemination of significant new knowledge in experimental equilibrium thermodynamics and transport properties of chemical systems. The defining attributes of The Journal are the quality and relevance of the papers published.
The Journal publishes work relating to gases, liquids, solids, polymers, mixtures, solutions and interfaces. Studies on systems with variability, such as biological or bio-based materials, gas hydrates, among others, will also be considered provided these are well characterized and reproducible where possible. Experimental methods should be described in sufficient detail to allow critical assessment of the accuracy claimed.
Authors are encouraged to provide physical or chemical interpretations of the results. Articles can contain modelling sections providing representations of data or molecular insights into the properties or transformations studied. Theoretical papers on chemical thermodynamics using molecular theory or modelling are also considered.
The Journal welcomes review articles in the field of chemical thermodynamics but prospective authors should first consult one of the Editors concerning the suitability of the proposed review.
Contributions of a routine nature or reporting on uncharacterised materials are not accepted.