2D router chip design, analysis, and simulation for effective communication

Abstract

The router is a network device that is used to connect subnetwork and packet-switched networking by directing the data packets to the intended IP addresses. It succeeds the traffic between different systems and allows several devices to share the internet connection. The router is applicable for the effective commutation in system on chip (SoC) modules for network on chip (NoC) communication. The research paper emphasizes the design of the two dimensional (2D) router hardware chip in the Xilinx integrated system environment (ISE) 14.7 software and further logic verification using the data packets transmitted from all input/output ports. The design evaluation is done based on the pre-synthesis device utilization summary relating to different field programmable gate array (FPGA) boards such as Spartan-3E (XC3S500E), Spartan-6 (XC6SLX45), Virtex-4 (XC4VFX12), Virtex-5 (XC5VSX50T), and Virtex-7 (XC7VX550T). The 64-bit data logic is verified on the different ports of the router configuration in the Xilinx and Modelsim waveform simulator. The Virtex-7 has proven the fast-switching speed and optimal hardware parameters in comparison to other FPGAs.